Size for rims please!!!!
My bad. I have a 2007 G35 coupe 6MT. I want to know the biggest size of rims I can put on the car. Im guessing 20 inch rims is as big as i can go, but what about thw width? The width is different in the frontthan the back, so im lookingfor advise to see what you think i can put on my car. I want it to have a nice stance. I have A&W coil overs already on the car and its dropped, but i need wheels now. So what size and dimensions for my wheels and also tires if you can help. I want the tires n wheels to look thick all the way around.
Marcos, there are several 19" Volk rims on our Marketplace under Private Classified. If you can find a set in your area you can save shipping...Gary
This is what he requested! 275s might be a better choice up front, 255s too small on the 9.50" rim! Remember he wants major thick rubber on his ride! The 275s up front and 9.50" rim will work easily, just like the 305s on those 10.50" rims. Marcos, there are several 19" Volk rims on our Marketplace under Private Classified. If you can find a set in your area you can save shipping...Gary
That was never mentioned once
275/305 is MAJOR overkill op
You WILL need fender work to fit the 305s out back properly and even more so with any sort of drop.
And Jesus Christ I know from experience
I ran a 275/305 with a 9.5/10.5 combo on my volks
It handled like a boat and was much too large and yes my fenders are rolled and pulled up front
265/285 and that is it.
I'm not entertaining the 305s out back on a stock body conversation anymore
Thats odd, because my 275/295 setup allows my 3600+lb car to handle just fine. Are you referring to the handling with a "stretched" setup?
Gary
forget the rims what front lip/splitter is that
So i got Zedd SLT wheels. 19's 9.5 front, 11 in he back. The final question, what size tires do i get? I prefer thick tores, but thick enough without rubbing. All my fenders are rolled and pulled a bit.
Thread
Thread Starter
Forum
Replies
Last Post
azslider86
Brakes & Suspension
4
Apr 20, 2016 11:00 PM
mjw011689
Engine, Drivetrain & Forced-Induction
0
Apr 16, 2016 01:54 PM



