G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

2004 G35 Coupe Headlights

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 24, 2017 | 04:18 PM
  #1  
Tony Siracuse's Avatar
Thread Starter
|
Registered User
Joined: Apr 2017
Posts: 17
Likes: 0
2004 G35 Coupe Headlights

Hey guys I've searched and I'm kinda having a hard time understanding as I have never messed with headlights other than changing bulbs. So basically the top light on my car doesn't work, which I believe is the low beam which is a D2R. Well long story short the previous owner told me the only thing he had for the low beam was the D2R bulb, which I confirmed. But they do not work. He said I need everything BUT the bulb. So what exactly do I need in laymans terms. If there's a thread you can point me to I'd appreciate that. But I'm just looking for a quick answer so I can legally drive my car.
 
Reply
Old Apr 24, 2017 | 07:50 PM
  #2  
Urbanengineer's Avatar
Super Moderator
10 Year Member
Liked
Community Favorite
iTrader: (3)
Joined: Jun 2013
Posts: 11,174
Likes: 1,044
From: OH-IO
Premier Member

I believe the car has HID low beam and Halogen high beam. If you look directly on the clear lens you will see the bulb type!

If it doesnt work, swap bulbs side to side. If that doesn't work, swap the ballasts side to side. If the problem follows the bulb it's the bulb, if the ballast it's the ballast. If neither, you might have a short.
 
Reply
Old Apr 25, 2017 | 12:29 AM
  #3  
Tony Siracuse's Avatar
Thread Starter
|
Registered User
Joined: Apr 2017
Posts: 17
Likes: 0
I don't think I have a halogen light. Suppose the only thing I have is the wire coming from the harness and the bulb and the headlight, what am I missing?
 
Reply
Old Apr 25, 2017 | 06:31 AM
  #4  
Blue Dream's Avatar
I drove ttrank's car solo
iTrader: (50)
Joined: Mar 2009
Posts: 18,299
Likes: 1,488
From: By the sea, Tx
G35 sedan w/ too much money in mods
Premier Member

^^Your high beam/fog light bulb is an H4 which is a halogen. Some people upgrade to HIDs but you have to install a conversion kit to do it. It's not just a simple matter of changing the bulb.
 
Reply
Old Apr 25, 2017 | 11:38 AM
  #5  
Tony Siracuse's Avatar
Thread Starter
|
Registered User
Joined: Apr 2017
Posts: 17
Likes: 0
I said I already have the top Bob, which is the D2R. What I'm trying to figure out is if I only have the wire connected to the bulb in the bold isn't working, what else do I need I think I am missing the ballasts but I don't know what else I need other than the bulb in the wire in the ballasts. Do I need some kind of H ID kit?
 
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:54 PM.