my car is pulling code C1127 rear right output abs solenoid circuit fault and C1156 CAN communication or steering angle sensor. I replaced the steering angle sensor and clock spring myself, but no change. I still have an air bag light, in addition to ABS, Slip, and VDC off lights on. Anyone else have this problem?

 

Steering angle might need to be recalibrated by the dealership, did the code just pop up out of nowhere one day or was it after you removed the steering wheel or something else? I'm having trouble actually finding the DTC C1156 in the FSM. What exact year coupe do you have?

C1127 is an electrical problem saying the circuit is open (broken wire) or shorted, this can happen either at the wiring going to the ABS controller or sometimes internally if the solenoid itself breaks.

 

I am probably going to take it to the dealership tomorrow just to get some eyes and insight on it. I got the car with the airbag light on, never cared for it because at the time my state inspection didn't care for it. Now the state inspection regulations have changed here in Massachusetts where it won't pass safety. its a 2003. I was thinking the C1127, could be a wheel speed sensor, but who knows. I hope it isn't an electrical problem. Those are a pain. thanks for your reply though man.

 

Pretty sure it's not a wheel speed sensor, those are codes C1101 through C1108.

C1127 is a code related to the actual VDC actuator that's located right off the brake master cylinder.