Hey everyone, I'm in need of 5 of these screws that go onto radio bracket. Hopefully someone could help me out with some part numbers.

 

Look like you could go down to Home Depot and buy some truss head #2 phillips screws and either take a hacksaw to cut them down to size or just snip them with a pair of side cutters or lineman pliers.

Standard coarse thread pitch, just match the thread diameter.

 

Most wire strippers have screw cutters on them.

 

Pretty sure that is for cutting wire. It is nearly impossible to cut the end of a screw in that way.

 

No there are screw breakers built into them near the pivot point. It's actually not THAT common but some of the longer handled ones do.

My small Klein's do not, they have the holes drilled but they are not tapped on either side. I always just drill and tap holes myself because it's super handy having screw breakers for 6-32 and 8-32.