G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

2007 Infiniti G35 Sedan not starting

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 2, 2024 | 01:51 PM
  #16  
Tonia's Avatar
Registered User
Joined: Aug 2024
Posts: 2
Likes: 0
everything but running
Won’t start won’t do anything changed batteries in key fob all the dash lights work

Originally Posted by telcoman
With the lights on, when you press start do the lights dim or go out? Measure the voltage across the battery when you attempt to start the car
Just because you got a battery not too long ago does not mean it doesn't have a weak or dead cell?
I need help
 
Reply
Old Aug 2, 2024 | 01:53 PM
  #17  
Tonia's Avatar
Registered User
Joined: Aug 2024
Posts: 2
Likes: 0
everything but running
Does the same thing dash lights come on fans come on radio works but when I push to start I get nothing I’ve put it in N and still nothing it won’t start with key fob it just doesn’t start
 
Reply
Old Aug 2, 2024 | 05:34 PM
  #18  
jbarnett250's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
Joined: Sep 2014
Posts: 377
Likes: 55
From: Walpole MA
If your fans come on when you are in acc mode, that sounds like the fail safe mode when there is a problem on the CAN bus. If the modules can't talk to each other, the car doesn't know how hot it is so it runs the fans just in case. You need to get your codes read. You probably have a U1000 code for CAN comm failure from one or more of the modules. If one of the modules is bad and shorting the CAN bus, you can figure this out by removing the modules from the bus one at a time until the U1000 error goes away. Usually this fault will allow the starter to crank the engine but it won't start because the immobilizer isn't satisfied because it talks on the same communication bus. Start by having the codes read. If the car won't start to get you somewhere to read the codes, you're going to have to get a cheap code reader so you can do it at home or get it towed somewhere to get somebody to look at it.
 
Reply
Old Aug 4, 2024 | 11:25 AM
  #19  
shurur's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2013
Posts: 276
Likes: 39
From: Tampa
2003 G35 Coupe
I think the Autel MaxiScan MS309 will read those Ucodes.

I used it to read my Transmission codes.

The thing is ~$20 on Amazon.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VinhFTW
G35 Coupe V35 2003 - 07
29
May 22, 2020 12:21 PM
Jaay210
G35 Sedan V36 2007- 08
6
May 16, 2020 04:20 PM
cbrseadude
G35 Sedan V36 2007- 08
2
Oct 9, 2014 11:01 AM
matt1028
G35 Coupe V35 2003 - 07
1
Jun 8, 2012 12:45 PM
khoacalacan
G35 Coupe V35 2003 - 07
15
Sep 29, 2011 08:28 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:09 AM.