Hello fellas. I installed sandwichplate to my v35 and ended up with weird noise coming from plate.
Does anyone know what occurs this weird noise?
I did a little test drive and temps went up to normal so oil is circulating i think.
Could this have something to do with oil flowing troughg the sandwichplate.
(Sorry for bad grammar haha)
I appriciate your answers.

Link to noise

 

I'm not too familiar with these however if I took a guess at it, it sounds like a vibration. Are you positive you have everything tightened up correctly? And does your oil pressure read okay?

 

Thanks for your response.
Its only doing this when warm (oil temp above 50)
And yeah i have checked that everything is okay.
I dont have oil pressure gauge in my system yet
Its coming.

 

Sounds airy...vacuum leak?

 

Is the car throwing any codes since installing this sandwich plate? I assume you mean the intake plenum spacer plate like a Z1?

If you did install one of those you need to make sure you tightened and torqued the bolts down in the right sequence and you got gaskets installed correctly. Also any hoses you might have disconnected.

 

Its common for people to pinch the rubber gasket around the oil filler neck when they put the plenum back together. Check that too.

 

will do, thanks 👍🏻