Car only cranks after transmission replacement
Car only cranks after transmission replacement
After replacing transmission car only cranks
my ecu was sent off and tested and came back fine
car has fuel pressure but isn’t getting any fuel at all
key was reprogrammed
sparkplugs and coil packs was tested and replaced but still no spark either
battery was charged
idpm was tested in a friends car and his started right up
so at this point I’m confused
Also we checked both tcm from both transmissions
my ecu was sent off and tested and came back fine
car has fuel pressure but isn’t getting any fuel at all
key was reprogrammed
sparkplugs and coil packs was tested and replaced but still no spark either
battery was charged
idpm was tested in a friends car and his started right up
so at this point I’m confused
Also we checked both tcm from both transmissions
Is it auto or manual?
was the flywheel replaced? https://my350z.com/forum/2003-2009-n...nit-start.html
was the flywheel replaced? https://my350z.com/forum/2003-2009-n...nit-start.html
Is it auto or manual?
was the flywheel replaced? https://my350z.com/forum/2003-2009-n...nit-start.html
was the flywheel replaced? https://my350z.com/forum/2003-2009-n...nit-start.html
yea we pulled the fuel rail and fuel was all over the place and we swapped the sensors with my friend 350z
Trending Topics
it was at first but we reprogrammed the key I’m at a stump with this
Thread
Thread Starter
Forum
Replies
Last Post








. Crank sensor tests good?
