I've done a search and looked at what some folks have said in the past, primarily about 6MTs pre-'05. Wondering what the current thinking is, particularly with respect to '05s because that's what I have.

What are everybody's experiences with adding short shifters to '05s? Which one did you get any why? Cost? If you decided not to, why? How about the adjustable ones?

yes i would get one.. actually im planning to later

It's still hard to choose from all the short shifters on the market currently...
People usually debate over 350evo, B&M and Rogue Engineering's shifters.
I read a review on my350z.com saying that the 350evo is very good but with a little rattles after 5000rpm. But overall it's still good with its much shorter throw.
Previously I eliminated B&M as a choice, however, someone just reviewed that it can be very good with good installation. It can have short throw and without any noise.
For the Rogue shifter, it's always good but the throw is just not as short as the B&M and 350evo.

Could someone help me to decide over the three?

Here's a thread on the my350z.com where people had a great debate over the three short shifters: http://www.my350z.com/forum/showthre...ighlight=b%26m

Wow

i put the rogue short throw in my 03 and love it. If you are going to put one in go with the rogue. The b&m rattles and has a sloppy reverse. go to

http://www.rogueengineering.com/

you wont be dissapointed. Also if you are goin to get one i sugest getting the shifter cup they break very easily when installing the shifter you can get it through www.350evo.com or performancenissanparts.com for about 10 bucks

:O) hope this helps

the 05's also come with a short shifter from factory...