I made my stock G tube into a Z tube!
#17
Originally Posted by G35UKY
I covered the silencer hole in the stock tube with aluminum tape for duct work, which, basically, converted it to a Z tube, and I used the same tape to cover the vents/holes in the bottom of the air filter box to cancel out the ait silencer in the air box as well.
The exhasut note is noticably louder!
Give it try. It'll only cost you ~$5.00 for a roll of aluminum tape. I just hope the tape never comes loose and flies into the air plenum!
I thought about using two part epoxy type glue to make sure that the tape never comes loose but was too lazy at the time to do it because I did not know if it would even make a diffence. If you do it, use glue!
The exhasut note is noticably louder!
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
![Wink](https://g35driver.com/forums/images/smilies/wink.gif)
#19
Originally Posted by TheGest
ya sure let me go just tape up the inside of my car, i rather spend the 5 dollars on a IN&OUT Burger Meal
I think you guys are just pissed because you paid for a Z tube.
![Wink](https://g35driver.com/forums/images/smilies/wink.gif)
#20
I made my own Z Tube 2 years ago and it still is fine. I used these round tire patches I found at the auto store. I used the glue it came with and then also epoxy. I check it every 3000 miles when i clean my filter and it has held up. It gets hot in the tube but not that hot that it will melt the rubber patch. I also got flamed and everyone said that I was cheap and that if you have a G you can buy a tube. I like to build things and work on my car. But some people on this forum do not like DYI. I dont know why? Now for the tape. Its a little ghetto and might fall off. But if you take about an hour you can do it right and you will not have to worry.
Last edited by madabs; 06-23-2005 at 09:00 AM.
#22
Originally Posted by madabs
I made my own Z Tube 2 years ago and it still is fine. I used these round tire patches I found at the auto store. I used the glue it came with and then also epoxy. I check it every 3000 miles when i clean my filter and it has held up. It gets hot in the tube but not that hot that it will melt the rubber patch. I also got flamed and everyone said that I was cheap and that if you have a G you can buy a tube. I like to build things and work on my car. But some people on this forum do not like DYI. I dont know why? Now for the tape. Its a little ghetto and might fall off. But if you take about an hour you can do it right and you will not have to worry.
![Mad](https://g35driver.com/forums/images/smilies/mad.gif)
#23
I will never post any DYI mods that I do again including the mirror reverse tilt down and fold in that many want to hear about.
#24
I actually thought the idea was pretty creative. I too like the fact that your mod retains the "stock-look" by keeping the G intake with the part that integrates with the engine cover.
Don't feel bad. Anybody that has been creative or invented something throughout history has had detractors. Overtime, when their ideas have proven themselves the inventor is thought of as being brilliant and not an idiot. In the case of your mod, it is pretty brilliant.....it might need some refinement but it is still brilliant. Keep on coming with the ideas......I think they are pretty good (eventough, in this case, I bought a z-tube quite a few months ago and cannot benefit from your idea, someone else might).
Also, remember that in the end, it is YOUR car.......you can do whatever you want to it that makes YOU happy. You did the mod and it is a fulfilling accomplishment for YOU.....if others do not want to benefit, that's cool too. The Forum is here to share ideas. Others might share their ideas about your ideas (these might be good or bad comments) but it is still sharing of information. Look at it this way.....your post is about a mod and not about a fake story of running from the cops.
Don't feel bad. Anybody that has been creative or invented something throughout history has had detractors. Overtime, when their ideas have proven themselves the inventor is thought of as being brilliant and not an idiot. In the case of your mod, it is pretty brilliant.....it might need some refinement but it is still brilliant. Keep on coming with the ideas......I think they are pretty good (eventough, in this case, I bought a z-tube quite a few months ago and cannot benefit from your idea, someone else might).
Also, remember that in the end, it is YOUR car.......you can do whatever you want to it that makes YOU happy. You did the mod and it is a fulfilling accomplishment for YOU.....if others do not want to benefit, that's cool too. The Forum is here to share ideas. Others might share their ideas about your ideas (these might be good or bad comments) but it is still sharing of information. Look at it this way.....your post is about a mod and not about a fake story of running from the cops.
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
#25
Registered User
iTrader: (2)
Join Date: May 2004
Location: Staten Island, NY
Posts: 1,982
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by G35UKY
I will never post any DYI mods that I do again including the mirror reverse tilt down and fold in that many want to hear about. ![Mad](https://g35driver.com/forums/images/smilies/mad.gif)
![Mad](https://g35driver.com/forums/images/smilies/mad.gif)
![Roll Eyes (Sarcastic)](https://g35driver.com/forums/images/smilies/rolleyes.gif)
#26
with any post, you may get comments/criticism. and in this case, most ppl stated that it may not be a good idea since the tape may loosen up. i don't see why anyone would get angry over this. for example, there is also a oakley thread where the poster wanted to repair his 2 year old oakleys. most ppl said to just buy a new one. the poster agreed...no big deal.
it's unfortunate if the original poster took it the wrong way and will not post the reverse mirror info. however, i don't think the members were out of line.
p.s. it's all good dude. please don't hold out on us
it's unfortunate if the original poster took it the wrong way and will not post the reverse mirror info. however, i don't think the members were out of line.
p.s. it's all good dude. please don't hold out on us
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
#27
Originally Posted by G35UKY
Thanks for the incouragement, Madabs. I love doing things myself also and hate to buy things when it can be very easily done other ways and still be reliable. I was just trying to offer information about an easy mod that is stealthy, which I like, works the same as the Z tube, and just happens to be cheap. I will never post any DYI mods that I do again including the mirror reverse tilt down and fold in that many want to hear about. ![Mad](https://g35driver.com/forums/images/smilies/mad.gif)
![Mad](https://g35driver.com/forums/images/smilies/mad.gif)
As many said tho, keep an eye on the tape. I may loosen with heat.
Congrats on your ingenuity and I'm sure many here would enjoy any other ideas you have.
Keep 'em coming.
C.
#28
Originally Posted by Gsedanman
Don't be put of by a few neg posts bro. You've got admirers here you don't even know about, and yes you can bet some of them wish they'd saved the $$$ for the Z-tube.
As many said tho, keep an eye on the tape. I may loosen with heat.
Congrats on your ingenuity and I'm sure many here would enjoy any other ideas you have.
Keep 'em coming.
C.
As many said tho, keep an eye on the tape. I may loosen with heat.
Congrats on your ingenuity and I'm sure many here would enjoy any other ideas you have.
Keep 'em coming.
C.
![Wink](https://g35driver.com/forums/images/smilies/wink.gif)
![Roll Eyes (Sarcastic)](https://g35driver.com/forums/images/smilies/rolleyes.gif)
Thread
Thread Starter
Forum
Replies
Last Post