I would like to get a count (this isnt signing up) of who is interested in purchasing a front license plate frame that uses your tow hook similar to the stillen design but for much less.

I started a fabrication business long ago but was completely blineded about designing and manufacturing one of these. I will have first production pieces in under 2 weeks.

With the kit comes the 1) threaded rod, 2) license plate backing, 3) black frame (changeable at your will), and a 4) single screw binding the backing plate to the rod. (It threads right through)

By popping off your tow hook bumper entry point and installing this takes all of 2 minutes with just a screw driver.

Material of the rod is brass for 2 reasons. One is its strength properties over cheap aluminum. Secondly, it machines well.
*Though aluminum machines much more easily, depending on grade, it can also warp easily due to machining.
This said, the rod will thread perfectly every time.

All pieces will be quality inspected before shipment. If any unit arrives damaged, or does not fit (which I guarantee will not happen) I will take full responsibility and either replace or refund your money (your choice)(30 day)

Units are going for $42.50 including shipping/handling to all of the continental US. If you choose to pay via paypal, please ad an extra $1.50 since they are convenient theives

I am doing this professionally (of course), so leave any worrying to me.

So please, all those who are interested, state so here so I can just get a general headcount. Again, this isnt signing your name up for one, so Im not holding you to it just need appx numbers.


Thanks!

P.S this is a G35driver.com exclusive to start off with. I owe a lot to these forums.

 

interested (not 100% sure if its worth the $40).. for those end of the month driving

 

interested...hope it will fit properly and not too far from the bumper.

will it be 40 shipped?

 

it will sit appx 1 inch off of the bumper to give it a flush look. any closer and it may possibly cause scraping. Secondly, I promise a tight and propper fit everytime.

My degree is in Mechanical Engineering and work in manufacturing still. I defintiely wont be shipping a non-tested product.

To make it even for everyone after doing max shipping charges, the cost is going to be $42.50 including shipping to everyone..

 

Interested, hopeing it fits on a 05 sedan.

 

start a list for u

1. Klumzyee
2. waterp7
3. gary245
4.
5.
6.
7.
8.
9.
10.

 

thanks for getting that started, much appreciated.

 

1. Klumzyee
2. waterp7
3. gary245
4. imalazeeass
5.
6.
7.
8.
9.
10.

 

for the right price... IM in.

 

1. Klumzyee
2. waterp7
3. gary245
4. imalazeeass
5. z2g
6.
7.
8.
9.
10.

please post up some pics!!!

 

Good luck with this bro. Sounds good!

 

This fits the '05 coupe right? I believe for late '04 and '05 the screw for the tow hook is larger than '03 and early '04. Someone correct me if I'm mistaken. Can you post some pix of the final product installed with a front and side view (to show gap)?

1. Klumzyee
2. waterp7
3. gary245
4. imalazeeass
5. z2g
6. hensta
7.
8.
9.
10.

 

Is this the same thing as the stillen one? They've had one for a while now.

 

If this fits 05... then I'm in.

1. Klumzyee
2. waterp7
3. gary245
4. imalazeeass
5. z2g
6. hensta
7. visualfusion
8.
9.
10.

 

1. Klumzyee
2. waterp7
3. gary245
4. imalazeeass
5. z2g
6. hensta
7. ufgatorg35
8.
9.
10.