Do i need to change my stock head unit to put in a woofer and amp?

 

Not if you get an amp with high level inputs or a high to low-level converter. I would suggest the amps with it built in.

 

nope

 

Nope

 

Check out the JL Audio line of amps, they have really good sub amps with line-in inputs built in, that's what I'm using with a 10" JL W6V2, sounds great!!!

 

The ultimate mix for keeping your factory head unit and bypassing the factory amp is to use the JL CleanSweep.

I did that with my Bose system - removed the Bose amp - went with JL amps, 2 10W6's, and replaced all the inside speakers...love it to the moon!

For info - call Rommel at Street Sound Plus in Van Nuys - tell him Rick sent you!

Rick

 

not if you want to way down your car

 

dONT THINK SO. I GOT A BASSLINK AND WORKS FINE

 

For those who have the JL setup... whats the going rate on the setups you guys have.

 

You don't really need to change anything out. Just add an amp and sub woofer and you're good. Use the factory speakers for the highs and mids. Just turn the gain up on the amp for the bass that way you can have the bass turned down on the radio which will allow you to use the factory speakers as I suggested above. Not show quality, but sounds good.

I am using a soundstream 600 and 1 12" audiobahn alumn.

 

im currently runny a pair or jl 10 w3v2 with 500/1, going to up grade with jl13w6v2 with 500/1, i wonder how this is going to sound, Is this 500/1 amp strong enough to push a 13in w6v2? should i upgrade to 1000/1? any advice?