For anybody who has a lift setup in their garage (i.e., drive one car on it, raise up, drive 2nd car underneath) how tall is your garage? I'm just trying to figure out if our roof it tall enough to accomodate a g35 and a viper on a lift.

There's a guy around here who has a similar setup (prowler on bottom, viper on top of lift) but I don't think I can exactly ring his doorbell and ask to measure his garage height

 

Just hit the manufacturers and check the required hieght.

Also, you could check the height of both cars and then add about 3' to see if you have enough.

I don't see how a standard garage height would be enough. Those are what... ...9'-10' high?

 

Most lifts are around 14' tall. Thats plenty tall for two cars.

 

And also plenty tall for any garage that was not designed to accomidate such a lift.

 

Definately. Can't do it with a standard garage, unless there is some sort of lift that is made for that. My dad has been researching them for his new custom home and they all seem to be 14'.

 

Oooh, check this out. This may work...

http://www.revolutionlifts.com/four-post.asp

 

talk about tight, heh

 

A friend of mine has a Viper and a 3 series... parks the viper on the top, 3 series under. Standard size garage... not sure what lift he has but I can ask him.

 

my buddies dad has a lift in his garage but its freakin high(twice the height of the average garage)... just go ask that guy that has one... im sure he'll understand.. you might end up meeting a new friend.. your both car fanatics

 

dooooooooooooooo it

thx

 

ive been researching lifts to fit into my garage and the ones i lean towards are only 9 feet tall... which means you can probably get your g35 about 4.5 to 5 feet in the air... me personally... i only need to get the car 2 feet in the air to comfortablyso its perfect work on it

 

Here you go... said it's a Bend Pak Lift.

 

I think the guy you are talking about is my uncle. lol. what a small world

 

It's tight, but it does look to work. The G isn't all that tall, so one of those probably would do the job.

 

you could lower the G too to make it fit! ...