My 03.5 G35

I joined the forum a few weeks ago but i came over from the sr20forum, so i have my fair share of knowledge of Nissans.

I took some pics and Today and did a dual xenon retrofit.

I took some Maxima Xenon bulbs and ballast with ignitors and removed my stock hallogen bulb and installed the maxima xenon in there. the fit was snug but drilling in 3 screws aroun d the sides to bolt it down worked wonders.

about a 3 hour install to do it right. here ya go.


another
http://i151.photobucket.com/albums/s...r/PICT0034.jpg

side
http://i151.photobucket.com/albums/s...PICT0022-1.jpg

interior
http://i151.photobucket.com/albums/s...PICT0019-1.jpg

 

Clean 03.5! Just wondering, it looks like the stock reflector headlamps, so did you just install HID on your factory headlamps? Or did you retrofit projectors?

 

^^ those pics don't really show any part of the "retrofit" that was done.

 

here is a DIY pics.. remove the grill and wheel , thw wheel well splash gaurds by poping out the screw clips and 5 bolts under splash gaurd



next romve the wheel well fender cover
http://i151.photobucket.com/albums/s...PICT0017-3.jpg

remove old bulb and cut its harness you need to rewire it .

Yellow is power and red is high beam and the black is ground.

http://i151.photobucket.com/albums/s...PICT0018-1.jpg

next wire the red plug from the hid to the factory yellow and black to black. refer to pic
http://i151.photobucket.com/albums/s...r/PICT0020.jpg

next test for power

http://i151.photobucket.com/albums/s...PICT0016-1.jpg

after it lights up Dual Xenon , with out retro fiting projectors.

http://i151.photobucket.com/albums/s...PICT0021-1.jpg

another

http://i151.photobucket.com/albums/s...PICT0022-2.jpg

and 1 more

http://i151.photobucket.com/albums/s...r/PICT0023.jpg

i will post some night ones later

 

i see...so you retrofitted maxima d2r xenon bulbs, ballasts, igniters into the stock fog/high halogen bulb housing.

nice job, it should improve your visibility, especially with high beam on. having the fogs on with the low beam will probably cause significant amounts of glare for oncoming traffic though, since the housing wasn't designed for HID light output.

 

thats correct my friend,

can some one fix my links so that the show the pics please.

 

 

Thanks ,

you da man

 

Clean G man! Looks like mine minus the X and yours is black!

 

Damm these things are bright

 

Looks great man. How much did all this cost you?

 

^ $100 for the set and my time and a few screws i had laying around the tool box

 

Thats one helluva bargain.

Congrats man. Looks fantastic!

 

Thanks man !

I wanted to put the projector in there but that would have cost alot more.

 

Now i need a 04 350z suspension.