Same here in fact I have an apointment on Thursday for them to fix a rattle they supposedly fixed last week. So I went to walmart today and bought two packs of felt with ahesive backing per some one else's recommendations here on driver.

I removed the front two door panels and commenced to work. I eve removed the tweeter housng and cut thin strips to cover the speaker edges.

Any way much to my suprise I found that the tech hardly applied any felt or foam. So now I need to find the TSBs to see just what they say about fixing the door rattles.

 

The felt trick seems to have worked. I think you really have to apply to all the nooksand cranies though.

Sadly now I can hear a rattle coming from the rear deck... Oh the insanity!

 

That's right, just the glass run, it snaps right out, and then right back in, I did this on mine last night, so we'll see if it stops the tick. Something I did as well, was apply the silicone to the underside of the glass run on the topside of the door where it touches the metal, I had already tried inside the glass run a while back. I have one in my drivers door, that comes and goes, if you lean on the panel, it stops anyone else had this one?

 

ABQ_G35,

I think your door's noise was addressed in a TSB where they replace a bolt. There are some other noise TSB's at this site too:

http://www.infinitihelp.com/ownershi.../itb05-034.htm

 

mayve dyomat it..might take the rattle away