I have heard rumors that the point at which it starts to blink can be adjusted in 200 rpm increments. How do i do so? I have an 05 6mt

thanks

 

You adjust it buy toggling to it with your trip mileage on your speedo.

 

It is in the owners manual if you have one. If not you use the trip button. The rev light will blink 200-300rpms before it hits the rpm point you set, then the rev light stays on solid when you hit the set point.

 

Too bad the 03/04's don't have this.

 

push the trip button in your gauge cluster until you get to the rpm setting. default is at 8k if you hold the button down it should start blinking. then you push the trip button until you set the rpm you want. the light will blink 500 rpm before the set point and remain solid afterwards. unfortunately, in 6th gear, the rev light will still be active. meaning if you're cruising at 3k rpm and you have it set at 3k rpm it will blink if you're at 2500 rpm.