but my budget is tight so the only way I can do it right now is to install all parts myself. So for those that have installed this kit on their sedan I have a question.

What are the instructions for installing the rear lip? Does it go over the rear lower 'spoiler' (aka as the unpainted section) or does it completely replace that piece? Either way what happens to the 'unpainted' section that's on the quater panel?

I hope this makes sense....

 

I did my kit myself.

The rear valance goes over the existing. You have to take off the mud guards if you have them. You drill a lot of holes to install it. Instructsions and templates for the holes come with the kit.

-Tim

 

Thanks for the quick response....
That makes sense. So the drilling is into the unpainted area? My only other question is in regards to the side skirts. Are they just clipped and screwed in? The front bumper seems fairly easy as I've halfway taken it apart just to get my lights out.

 

The side skirts are a piece of cake... they just clip on. The front bumper is fairly easy as well... just take your time and follow instructions. The rear was the most difficult for me, but definitely do-able... took me about 5-6 hours or so. The instructions will take a while to make sense, so just go step by step and all will be well. All you need to install the kit is a lot of time... dont worry about the rest. I am very happy with my kit... so will you