1/4 in my G
1/4 in my G
Took my G to LACR last night. Im stock performance wise. And I was putting down constant 15.1 @92mph in the quater mile. Due to elevation you subtract .6 sec. off the time, so I was doing 14.5's. Want to get my Injen CAI and that should put me down to 14.9 (14.3). What has everybody else been running?
04 G35 Sedan Blk/Blk
Nissan Badges
Tein Basic(soon)
04 G35 Sedan Blk/Blk
Nissan Badges
Tein Basic(soon)
Re: 1/4 in my G
Court,
Please list all details.
Temperature?
60' ?
Tires? Stock I assume.
Octane gas?
How much gas? I mean 1/4, 1/2 or full tank
Did you remove spare/tools?
2004 G35s auto (bone stock)
-----------------------------------
2002 s/c Accord V6 auto
so far best 1/4 mile - 13.9@101.8
coming soon: custom internals, cams, performance auto tranny w/LSD
Please list all details.
Temperature?
60' ?
Tires? Stock I assume.
Octane gas?
How much gas? I mean 1/4, 1/2 or full tank
Did you remove spare/tools?
2004 G35s auto (bone stock)
-----------------------------------
2002 s/c Accord V6 auto
so far best 1/4 mile - 13.9@101.8
coming soon: custom internals, cams, performance auto tranny w/LSD
Re: 1/4 in my G
Temp: 40's
60ft: 2.30
Stock tires no deflation of psi
91 octane
1/4 tank
spare and tools not removed.
04 G35 Sedan Blk/Blk
Nissan Badges
Tein Basic(soon)
60ft: 2.30
Stock tires no deflation of psi
91 octane
1/4 tank
spare and tools not removed.
04 G35 Sedan Blk/Blk
Nissan Badges
Tein Basic(soon)
Re: 1/4 in my G
Ok. Minus elevation 14.5s is not bad, however practice on your 60', drop your rear tire pressure to 28-29 and remove spare + tools next time. Did you brake torque it? Were you shifting in manually or just left in auto?
My suggestion - get light (forged) rims and wide sticky tires and you should run at least 2.1xx, the less your 60' the better
your final result.
As far as other times I know 'normjack' here ran on his 03 auto sedan 14.36@96.86 - 60' 2.20 (50 degrees) with just K&N Air Filter replacement only I believe with stock tires.
Good luck!
2004 G35s auto (bone stock)
-----------------------------------
2002 s/c Accord V6 auto
so far best 1/4 mile - 13.9@101.8
coming soon: custom internals, cams, performance auto tranny w/LSD
My suggestion - get light (forged) rims and wide sticky tires and you should run at least 2.1xx, the less your 60' the better
your final result.
As far as other times I know 'normjack' here ran on his 03 auto sedan 14.36@96.86 - 60' 2.20 (50 degrees) with just K&N Air Filter replacement only I believe with stock tires.
Good luck!
2004 G35s auto (bone stock)
-----------------------------------
2002 s/c Accord V6 auto
so far best 1/4 mile - 13.9@101.8
coming soon: custom internals, cams, performance auto tranny w/LSD
Re: 1/4 in my G
You should do a 24 hour ecu reset - disconnect the battery's negative terminal - another 15 hp - viola.
Trending Topics
Re: 1/4 in my G
LACR is a really high elevation track.. I go there.. only becuase I dont want to go to california speedway.. (they requre helmets) some people say subtract .5 seconds..others say a full second.. i normally subtract .5..
Re: 1/4 in my G
power braking. At the light your on the brake and the gas.It gets your RPMs up then let go of the brake and bone out.
04 G35 Sedan Blk/Blk
Nissan Badges
Tein Basic(soon)
04 G35 Sedan Blk/Blk
Nissan Badges
Tein Basic(soon)
Re: 1/4 in my G
[crap, isn't that really bad for the brakes?]
nope its more load on torque converters in auto tranny.
2004 G35s auto (bone stock)
-----------------------------------
2002 s/c Accord V6 auto
so far best 1/4 mile - 13.9@101.8
coming soon: custom internals, cams, performance auto tranny w/LSD
nope its more load on torque converters in auto tranny.
2004 G35s auto (bone stock)
-----------------------------------
2002 s/c Accord V6 auto
so far best 1/4 mile - 13.9@101.8
coming soon: custom internals, cams, performance auto tranny w/LSD
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
FS[Texas]: KSport Air Suspension G35/350Z/M35
privatecorye
Steering & Suspension
1
May 31, 2016 01:56 AM
baker2795
Engine, Drivetrain & Forced-Induction
3
Sep 2, 2015 06:00 PM




