Under hood lighting with Oznium LEDs

Subscribe
Sep 9, 2007 | 08:40 PM
  #1  
Hello all,

So far I'm still working in on this project and I will post final pics and a "how-to" when everything is finished, but in the mean time I'll let you all salivate over what I have so far...

http://www.sfplayers.com/gallery/g35...ighting?page=1

The lights will come on when the hood is open (activated by the oem hood pin switch). The LEDs are 1watt super bright white 120 degree spread waterproof, drive over proof...

You can check 'em out here:
http://www.oznium.com/high-power-waterproof-led-module
Reply 0
Sep 9, 2007 | 08:54 PM
  #2  
I might just be stupid, cause im tired, but what is it that im looking for? I saw the picture that said, "here it is in action", and i didnt say anything. Can you help me out and point it out to me?
Reply 0
Sep 9, 2007 | 08:55 PM
  #3  
Quote: I might just be stupid, cause im tired, but what is it that im looking for? I saw the picture that said, "here it is in action", and i didnt say anything. Can you help me out and point it out to me?
It's the bracket attached to that part of the intake I was describing in the previous picture.
Reply 0
Sep 10, 2007 | 10:45 AM
  #4  
Reply 0
Sep 11, 2007 | 02:57 AM
  #5  
Any night pics?
Reply 0
Sep 11, 2007 | 03:01 AM
  #6  
Hehehe... I'm nowhere near that point at the moment.. I realized today I might modify the brackets some before I paint them. Give me about a week or two and I should have things together. Also, I finally found an SPDT relay with a 5vdc coil.. yay
Reply 0
Sep 11, 2007 | 03:13 AM
  #7  
Cool. We'll be waiting.
Reply 0
Sep 11, 2007 | 08:13 AM
  #8  
Are you going to wire any into the hood or just within the engine bay?
Reply 0
Sep 11, 2007 | 11:40 AM
  #9  
Quote: Are you going to wire any into the hood or just within the engine bay?
Just the engine bay. I decided I didn't want any wires going to the hood. With the 3 120 degree LEDs there should be plenty of light in the important places.
Reply 0
Sep 11, 2007 | 12:47 PM
  #10  
Quote: keep us posted on time and cost please... any maybe produce a few while you're at it!
Yes, after initial R & D I will try to re-make and measure costs, etc.
Reply 0
Sep 16, 2007 | 04:12 AM
  #11  
It's not done yet but I'm almost there...

http://www.sfplayers.com/gallery/g35...ighting?page=2
Reply 0
Sep 16, 2007 | 10:19 PM
  #12  
ok guys, it's done. It's almost dark here and as soon as it is totally dark I will take some night photos.
Reply 0
Sep 16, 2007 | 11:05 PM
  #13  
Finally some night shots:

Overview:


Belts easily inspected at night:


Finally, no more struggling to put in the oil dipstick:
Reply 0
Sep 17, 2007 | 12:44 AM
  #14  
The dipstick light is a great idea. Looks like something Infiniti should have done. Since they made the ridiculousness location for it and then that metal piece has an opening before it connects to the engine block. That one part of the car pisses me off more than anything. Thanks for the ideas. I think I'll give that a shot myself.
Reply 0
Sep 17, 2007 | 01:29 PM
  #15  
Very cool. I like it.
Reply 0