Oct 10, 2007 | 01:35 PM
  #1  
will this size fit? will stretching and pulling do the job or it just wont fit at all? this size will be all around. again im just wondering. i have a sedan.
Reply 0
Oct 10, 2007 | 03:02 PM
  #2  
no way in he11.

you'll have about 1" of wheel sticking out of the fender.
Reply 0
Oct 10, 2007 | 03:15 PM
  #3  
It would fit with a lot of negative camber and a mild drop with very stretched tires (~255). But it will look like crap IMO.
Reply 0
Oct 10, 2007 | 04:46 PM
  #4  
HAHAH...what he said^^^^
Reply 0
Oct 11, 2007 | 01:12 AM
  #5  
With fender flares!!!!!!!!!!!!!!!!!!!!!! it would looks SICK!!!!
Reply 0
Oct 11, 2007 | 02:07 AM
  #6  
Yea you will need a 42+ mm off set
Reply 0
Oct 11, 2007 | 02:14 AM
  #7  
Not on an 18". I bet with a 1.2" rear drop you could run a +35 10" rear with 18's and 265 or smaller. My 20x10" +40's tucked with Tein CS coils and didn't rub. The +42's look better (IMO).
Reply 0
Oct 11, 2007 | 02:26 AM
  #8  
True im runing 275/40 and lowered more then that.. I rub and ive cut my fenders a bit.. I need to finish it off and roll them.
Reply 0
Oct 11, 2007 | 03:26 AM
  #9  
It would fit in the rear if you stretch a 255/40/18 or 245/45 and run atleast -2.5 degrees of camber and your car is dropped atleast 2 inches.
-GP-
Reply 0
Subscribe