!!Look here before starting a new thread!! 2003-2006 Sedan FAQ's
#481
The following 2 users liked this post by NFSP G35:
B03Sedan (09-22-2015),
Mustang5L5 (04-25-2014)
#482
#484
Registered User
iTrader: (11)
#486
The following users liked this post:
Go Getta G35x (11-03-2014)
#490
#491
ok, i need to get a new g or q for my wife.
The dealer said the left front control arm bushings are bad and are asking $450!
what is best solution. Can i easily replace all the bushings or should i get new upper and lower control arms? is there a write up anywhere on this?
thanks
The dealer said the left front control arm bushings are bad and are asking $450!
what is best solution. Can i easily replace all the bushings or should i get new upper and lower control arms? is there a write up anywhere on this?
thanks
Upper arm is pretty easy to do.
This DIY for a RWD model is similar. The parts look the same, but these part numbers won't transfer over. But shows you how to get the lower arm out
http://my350z.com/forum/brakes-and-s...translink.html
Upper is pretty simple. If you look at it you'll see how to get it out
#492
#495
I have an aftermarket radio with a double din kit installed a little over a year ago. I believe their might be a damn wire loose because the radio would turn off if I hit bumps in the road or even when turning the steering wheel sometimes (big turns)? Recently I hit a pot hole and the radio turned off and wouldn't turn back on at all (HVAC still works). A few days later it randomly turned back on...now it's off again. Does it sound like a loose wire or could it be anything else? Also, am I going to have to tear apart my dash to check this wire?
2003 G35 sedan premium package.
I don't have any tools at the moment to do it, I am at my university apartment and will be heading home this weekend so I can tinker with it then.
Any help will be appreciated, thanks
2003 G35 sedan premium package.
I don't have any tools at the moment to do it, I am at my university apartment and will be heading home this weekend so I can tinker with it then.
Any help will be appreciated, thanks