where do you buy this from? its the little copper washer that fits with the oil plug.

 

I got some from my local dealer's parts department, I am not sure if you can get them elsewhere.

<font color=red>2004 G35 Sedan 6MT Desert Platinum/Willow</font color=red>

 

You need to get them from the Infiniti parts department.
I change our Maxima's oil myself, so I bought a bag of those
crush washers from Nissan. They don't sell them individually.

2003 Twilight Blue 5AT Sedan, sunroof,
Graphite Leather, splashguards,
12 wire Hyper-grounding kit,
350Z intake duct, Stillen Hi-Flow Airbox
Underbody rear diffusers, Drilled aluminum pedals

 

thanks guys.
what's a good price for them?

 

If you have to ask, you can't afford them! LOL
They arn't very expensive.


2003 Twilight Blue 5AT Sedan, sunroof,
Graphite Leather, splashguards,
12 wire Hyper-grounding kit,
350Z intake duct, Stillen Hi-Flow Airbox
Underbody rear diffusers, Drilled aluminum pedals

 

Instead of buying a new crush washer everytime you change oil try using a thread sealent. However, do not use a product like Loktite! I use my wife's discarded fingernail polish. Yamabond also works well. Only a thin layer on the threads is required. I've used this method for years on a variety of cars; no problems.

<font color=blue>Dan</font color=blue>

 

I just went to the nissan dealer (all the v-6s are the same) and the just gave me a couple for free. We're talking a 5 cent part. So if your dealer ship has any decent customer service what so ever, then they will just give it to you for free when you buy the oil filter.

 

If you order the oil filters from Grubbs, they include a washer for each filter purchased... very classy!

 

Part number 11026-01M02 $0.74 each.

Buy like ten of em and you will never need em again,



Better Life thru Chemistry
Black on Black 03.5 Sedan 6MT - Goodyear F1 GS-D3's 225/55/17, Custom Intake Tube, HyperGround Kit, Magnaflow resonator.

 

Teflon plumbers' tape works very well. Just a coupla snug wraps around the bolt threads and you can likely use the factory washer for the life of the car.

 

It is unlikely that shredded teflon tape bits would get from the oil pan into the engine or filter, but I would not want it in there. I suggest sticking with the crush washer.

<font color=red>2004 G35 Sedan 6MT Desert Platinum/Willow</font color=red>

 

how about this drain valve from Grubbs?
is this a good buy, no need for crush washers?

http://www.grubbsinfiniti.com/en_US/HomePage_1.chtml

 

Just anneal the damn thing and reuse it. If it is copper only, get a torch, heat it up and stick it back on!!!!

5's n 35's