He don't need to roll his fenders if he continues to use 235/45/18's. I am dropped about 1.2" and have no rubbing issues what so ever.

 

I am tucked in the rear and running 255/40/18 and it is perfect. Can't go any wider than that for me. And I am running conservative camber settings.

 

pics please... rear and side shots...

thanks

 

This is mine with 06 Z wheels which have the same width and offsets of the Track wheels. Running 245/45 on the rears, no rubbing whatsoever.

 

I didn't take pics with the tire set up. But I got new tires. Falken 452, 225/45/18 in the front, 245/45/18 in the rear. So I jus went with the stock setup.

Anyone know if there are infiniti center caps that fit the track wheels? The center caps off my stock 17's are too small, by about 5 mm.

 

I used center caps off non sport 17" sedan wheels. They fit fine.

 

you can dremel out the nissan emblem easy, just the 2 melted tabs behind the center caps. They will pop off easy after you grind down the tabs. Do the same to your infiniti one and re-glue it and you have yourself a perfectly fitted Center cap

 

Is it safe to try to pop center caps off without taking the wheels off?

 

I wouldn't.

 

^ +1.......

no matter what kind of flat head you're using, you're bound to damage the plastic edge when you pry it...

take time to do it right