Fabbed up a new exhaust. Whatcha think???
#1
Fabbed up a new exhaust. Whatcha think??? (Pics n vids)
Well... I had a Blitz Nurspec on the car. But I wasn't a big fan of the looks. SO, I decided to do a bit of cutting & welding this morning.
I cut the pipe off the Blitz muffler & I had a generic dual 4" tip stainless muffler in the garage. After a bit of cutting, fitting and some welding this is what I came up with!
Quarter View
Side View
Rear View
I cut the pipe off the Blitz muffler & I had a generic dual 4" tip stainless muffler in the garage. After a bit of cutting, fitting and some welding this is what I came up with!
Quarter View
Side View
Rear View
Last edited by SDale; 05-25-2008 at 02:31 PM.
#5
Thanks guys. I worked with what I had. I shortened it as much as I could and it only sticks past the bumper opening about and inch-inch and a half or so.
The way it's mounted it's got about aaaaaalmost a quarter inch of clearance around the bumper opening. That should be enough to keep it from cooking the bumper.
The way it's mounted it's got about aaaaaalmost a quarter inch of clearance around the bumper opening. That should be enough to keep it from cooking the bumper.
#6
#7
Trending Topics
#15
Thanks again fellas! I like the way it looks and sounds, but the Misses says it's too loud... And it's HER car. Not much I can really say about that! LoL Oh well, back to the drawing board! I've got some more stuff in the garage I can probably whip up.
I may just end up goung with a Thrush Turbo Muffler and a set of tips.
On a side note... After putting aroud 50 miles on it yesterday, it's gotten slightly deeper and a bit more mellow.
I may just end up goung with a Thrush Turbo Muffler and a set of tips.
On a side note... After putting aroud 50 miles on it yesterday, it's gotten slightly deeper and a bit more mellow.
Last edited by SDale; 05-26-2008 at 12:57 PM.