Hey, I recently got a G35 Sedan, its a 2003 (AT) with 89,000 Miles. I was starting to look into aftermarket parts for the inside and outside and I was looking for some advice.
I mostly stuck with hondas in the past, so for good prices and quality parts I don't know where to look.
I wanted to due the dash with carbon fiber, and I am also looking for a new gague cluster and the cluster with the temp display, both of mine have some crazy stains or something.
Does anyone make projector Headlights for g35s, or what are my other options

Also I had some questions about the motor, seeing as how it is a AT with close to 90,000 miles is there anything I should replace or do before I start working on the motor
Also W/(AT) what are my options with FI?
Is there anything I Should know about this car or motor that I may not have found yet? And does anyone know why my passanger window makes a really weird noise and has like a grease stain in a line up and down it?


Thanks for all the help in advance!

 

Congrats on the new purchase and welcome to the best G35 site ever!

Take advantage of the search feature on this site. Everything you have just asked has been covered here numerous times.

Good luck and happy modding

 

welcome to the forums

 

Welcome ...congrats on the purchase.

 

Welcome, search
Look in your owners manula and do all 90K maitnance stuff you feel are needed. I would do spark plugs, tranny fluid, gear oil, In cabin filter, fuel filter etc.
if you going to start modding dont change your air filter just get JWT or Stillen intake

 

Everything has been answered before so feel free to use the search feature and read the sedan faq as well.

 

Welcome to the forum!!!! The Search button has been a great tool to me and i am still constantly using it!!!! Again congrats on your purchase and happy modding!

 

I personally wouldn't do up the gauge cluster with overlay or other type of stick-ons; don't treat the G35 like a Civic Both cars are in two totally different classes. As far as the dirty center console and gauge cluster, I would try to clean the stains off with water and mild detergent; do not use harmful chemicals which could mar the finish on the surface.

 

I was not trying to do an overlay... Never was a fan of ugly nasty honda ****... But the inside of the plastic on the speedometer and the temp/compass display has some kind of like water stain or something on the inside.... I've seen it before on mustangs... Ill try to get a picture of it up later