G35 Sedan Suspension Picture Compilation Thread
#63
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
G35 Sedan Suspension Picture Compilation Thread
Lowered the car today on Tein H-Techs. Spent 11 hours at a local Tech Day, and we really only worked on 3 cars. The front springs were a little bit of a pain in the azz, but the back took about 15 minutes a side.
We had a Maxima that had struts, shocks, and springs that were replaced. Never again!! What a nightmare
I took a couple of pics so here they are. I'm curious to see how they settle. I went from over a 4 finger gap in the front and back to a little over 2 fingers. Car rides tighter and more responsive. Pictures don't do justice to how the car transformed in appearance. I'm very happy how they turned out
Before:
And after:
I'll give more updates in a few days when they settle a little more. A huge thank you goes out to Barry for hosting and Mauricio for his technical expertise. Also to everyone else who was there and helped out. I wouldn't advise doing this unless you know what you are doing or are with someone who does.
We had a Maxima that had struts, shocks, and springs that were replaced. Never again!! What a nightmare
I took a couple of pics so here they are. I'm curious to see how they settle. I went from over a 4 finger gap in the front and back to a little over 2 fingers. Car rides tighter and more responsive. Pictures don't do justice to how the car transformed in appearance. I'm very happy how they turned out
Before:
And after:
I'll give more updates in a few days when they settle a little more. A huge thank you goes out to Barry for hosting and Mauricio for his technical expertise. Also to everyone else who was there and helped out. I wouldn't advise doing this unless you know what you are doing or are with someone who does.
#64
#70
#71
^^ Coupe rears keep the rear just a tiny bit higher and the Z/Coupe combo seems to be the closest to achieving equal wheel-fender gaps front and back. Some of us are after that even-gap look, others would prefer a more level stance and don't mind if the gaps are a lil less in back than front. It's really not much different; I suggest you look for pics of each and see what you like. I happen to know KevcoG35 has Z's all around, as do a few of the prior posters in this thread.
#73
#74
The following 2 users liked this post by SDGenius:
Benny Manjoro (05-15-2015),
SurfsUp (12-12-2012)