G35 Sedan Suspension Picture Compilation Thread
#796
The following 2 users liked this post by NFSP G35:
JaE35 (08-23-2011),
jookyshank (08-15-2011)
#799
Loud snapping noise from my front driver's side
I have a 2004 G35x sedan and I have a loud metal snapping noise coming from my driver's side front end. The sound is present at all times and nothing makes it better or worse. It has gotten progressively worse over the last couple of months. My rotors and pads have been changed and my compression rod and cv axle joint assembly has been repaced but the sound is still present and unchanged!!!! I took it to the dealer but they said it was the cv axle assembly which I have replaced. My car has 60K miles on it. Please help!! The noise almost sounds like someone throwing a fork it a garbage disposal as it is being shut off??? I have checked the wheel for movement when it was off the gorund and it seems tight, in fact, everything seems tight!!!
#800
Question:
I have an 03 sedan and i just installed 04 coupe suspension ( shocks, springs, control arms, etc)
I can feel a lot less body roll than stock but now my ride is really bouncy. I can feel every little bump in the road. Is that normal?
My rims are stock with stock tires.
Any input will be appreciated.
I have an 03 sedan and i just installed 04 coupe suspension ( shocks, springs, control arms, etc)
I can feel a lot less body roll than stock but now my ride is really bouncy. I can feel every little bump in the road. Is that normal?
My rims are stock with stock tires.
Any input will be appreciated.
#803
#807
#808
advertised drop for z s-techs is .6"...so your looking at a 1.6 spring drop front and rear....if you use z shocks/struts you can add another .5 to the full drop front and rear
The following users liked this post:
chinleewan916 (08-29-2011)
#809
Im changing springs only, so its 1.6 drop all the way around using 350z s tech, that means im better off using s tech for g sedans because its advertize to do 2in front/ 1.3 rear. Any suggestions?