Mods for 2010. List em!
#1
Mods for 2010. List em!
Got this idea from the aggressive fitment thread. Post the mods you guys are thinking of doing in 2010.
My list- no particular order
Alliance bbk
Full wire tuck
polished engine bay
interior- seats, steering wheel, harness bar
new kit
color change
air suspension
shaved door handles, shaved door moldings
flared fenders
new wheels
oil cooler and tranny cooler
to be done:
koyo radiator
hood dampers
painted battery covers, and other engine bay stuff
paint bbk another color
projector headlights
dual tip muffler
My list- no particular order
Alliance bbk
Full wire tuck
polished engine bay
interior- seats, steering wheel, harness bar
new kit
color change
air suspension
shaved door handles, shaved door moldings
flared fenders
new wheels
oil cooler and tranny cooler
to be done:
koyo radiator
hood dampers
painted battery covers, and other engine bay stuff
paint bbk another color
projector headlights
dual tip muffler
Last edited by 4drmadness; 07-21-2010 at 04:29 PM.
#3
#4
#7
alarm with remote start, H&R sway bars, motordyne plenum spacer, exhaust, stillen rear lip, install front lip, repaint sideskirts, rear bumper, radiator support, hood, rear fenders, trunk (doggy door delete) strafe's front fenders, cross drilled and slotted rotors, headrest monitors, custom mount speakers on the rear deck, install Stech springs, Tokiko shocks and struts, camber kit, wheel spacers, white underglow leds, some more led lighting, personalized plates, install visor monitors and ceiling monitor, get headrest monitors, custom mount a 7" monitor on trunk lid, jdm window visors
Trending Topics
#9
#12
ill Sedan
iTrader: (87)
This is my mod list at this point, we'll see how far I get in 2010.
-Rear BBK
-03-04 rear bumper swap with rear lip
-A few things painted here and there
-HFCs
-3.7 gears
-Tune
-Front camber arms
-Aluminum undertray
-Projector retrofit
-Interior (audio, headliner, etc.)
-Rear BBK
-03-04 rear bumper swap with rear lip
-A few things painted here and there
-HFCs
-3.7 gears
-Tune
-Front camber arms
-Aluminum undertray
-Projector retrofit
-Interior (audio, headliner, etc.)
Last edited by CandlestickPark; 12-31-2009 at 08:00 AM.
#14
You let me know who does it and I will send you my lights.
My mods are pay bills first but
1. Get my wheels redone and hopefully get the outbarrels extended .5 more
2. Finally put that spacer on.
3. Want that new trunk
4. Maybe the first X with air ride
5. Get sway bars made for the X
6. Coupe seats
7. rear bbk or maybe a new full bbk
8. If I dont do air ride, I want to get those cylinders that is like airride.
9. I am just rambling right now, so duct tape for my mouth would be great.
10. I would like to do a projector retrofit
11. Maybe a daily drive so I can save my mileage if I drive down to cali again.
I think that is good enough.
My mods are pay bills first but
1. Get my wheels redone and hopefully get the outbarrels extended .5 more
2. Finally put that spacer on.
3. Want that new trunk
4. Maybe the first X with air ride
5. Get sway bars made for the X
6. Coupe seats
7. rear bbk or maybe a new full bbk
8. If I dont do air ride, I want to get those cylinders that is like airride.
9. I am just rambling right now, so duct tape for my mouth would be great.
10. I would like to do a projector retrofit
11. Maybe a daily drive so I can save my mileage if I drive down to cali again.
I think that is good enough.
#15
- install my OEM Brembo + DBA rotor setup before WEKFEST!!!
- Circuit Sports front & rear main under braces
- Matte "carbon fiber" roof wrap
- Front lip for OEM Nismo bumper w/cf front splitter
- JDM 05-06 rear tails
- Transgo VB upgrade
- 3.5 FD & vLSD equipped 6MT rear diff swap
- 3.7 FD upgrade + Nismo finned diff cover(maybe)
- BC Racing BR coilovers(maybe)
- Powergrid endlinks(maybe)
- Whiteline Plus urethane front upper/lower inner control arm brushings & rear traction subrame urethane bushing kit(maybe)
- OEM wheat coupe headrests(if i can ever find them)
- Circuit Sports front & rear main under braces
- Matte "carbon fiber" roof wrap
- Front lip for OEM Nismo bumper w/cf front splitter
- JDM 05-06 rear tails
- Transgo VB upgrade
- 3.5 FD & vLSD equipped 6MT rear diff swap
- 3.7 FD upgrade + Nismo finned diff cover(maybe)
- BC Racing BR coilovers(maybe)
- Powergrid endlinks(maybe)
- Whiteline Plus urethane front upper/lower inner control arm brushings & rear traction subrame urethane bushing kit(maybe)
- OEM wheat coupe headrests(if i can ever find them)