Rear door lock??
#1
#2
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
#3
YOu have a problem. If your handle outside will not work and your door is closed with the child lock on, the only thing i can think of is to cut a hole in you door panel and try to pull the cable or rod. I havent pulled my rear door apart to see what the configuration is. Some how the rod to your handle either came loose or broke
#5
#6
#7
Trending Topics
#8
If his actuator broke, taking off the door panel wont work. All your door handle is doing is pulling on a line to unlock. If the lines broke then taking it off might work. But I believe the outside door handle is its own handle so regardless if the inside one is connected or not the Outside door handle should work
https://g35driver.com/forums/body-in...l-removal.html
Good luck OP
https://g35driver.com/forums/body-in...l-removal.html
Good luck OP
#9
On all cars i have worked on the outside and inside handle are connected to the latch. The child safety just messes with the inside handle. The outside somehow broke or the rod or latch broke or came loose. In most cars the rod usuallly goes down when the handle is lifted. So if you can see down into the door with a flashlight you might be able to shove something down to open it. I have pulled many doors apart as i work in a body shop so that is pretty much ur only hope without tearing up the door panel
#11
#12
I had an issue about a month ago where the door handle would not open from the outside, then eventually neither would work. The replaced everything and said the lock actuator jammed. Now it is broken again. Driver side rear door, seems to have something to do with the cold, I have an 07 g35x for reference, and there seems to be a lot of problems with other Nissan models having their door handles freeze/break if you poke around online.
Thread
Thread Starter
Forum
Replies
Last Post
will091195
General Tech Questions
1
07-27-2015 09:19 PM