q45 projector retrofit...
#1
#3
ill Sedan
iTrader: (87)
#4
ill Sedan
iTrader: (87)
#6
#7
ill Sedan
iTrader: (87)
Trending Topics
#8
Its been done in the lower foglight location on a sedan before.
The circumference of the q45 shroud/projector housing is larger than even the 03-04 coupe "headlight holes" . You would have to do some heavy modifying of the bezel if you wanted them to fit. The more viable option would be to make a whole new bezel for it it, somewhat like the guy with the 350z did to retro these.
I believe they have a 4.25" diameter and the biggest hole in the 03-04 housing is 4". You wouldnt even have an option with an 06 housing since the fog location is smaller.
The circumference of the q45 shroud/projector housing is larger than even the 03-04 coupe "headlight holes" . You would have to do some heavy modifying of the bezel if you wanted them to fit. The more viable option would be to make a whole new bezel for it it, somewhat like the guy with the 350z did to retro these.
I believe they have a 4.25" diameter and the biggest hole in the 03-04 housing is 4". You wouldnt even have an option with an 06 housing since the fog location is smaller.
#9
#11
ill Sedan
iTrader: (87)
#12
I guess I was a little late to the party. I was going to warn you to stay away from the replicas. They sell them on ebay. They look like crap compared to the oem projector housings. You can really tell the difference.
#14
Its been done in the lower foglight location on a sedan before.
The circumference of the q45 shroud/projector housing is larger than even the 03-04 coupe "headlight holes" . You would have to do some heavy modifying of the bezel if you wanted them to fit. The more viable option would be to make a whole new bezel for it it, somewhat like the guy with the 350z did to retro these.
I believe they have a 4.25" diameter and the biggest hole in the 03-04 housing is 4". You wouldnt even have an option with an 06 housing since the fog location is smaller.
The circumference of the q45 shroud/projector housing is larger than even the 03-04 coupe "headlight holes" . You would have to do some heavy modifying of the bezel if you wanted them to fit. The more viable option would be to make a whole new bezel for it it, somewhat like the guy with the 350z did to retro these.
I believe they have a 4.25" diameter and the biggest hole in the 03-04 housing is 4". You wouldnt even have an option with an 06 housing since the fog location is smaller.