Tried posting this in the Tech area and was "denied access"


All measurements are in inches.


Wide: 28-1/4th

Tall: 20-1/2

Depth on driver’s side: Gradual from 3-3/4 to 2 inches (Center to Driver Side)

Depth on Passenger side:
3-3/4

SCREW TO SCREW:
24-1/2inches
Screw to Notch:
18-1/4th

Notch to Notch Wide:
15inches

Notch Size:
½ Wide
½ Tall
1/4th Depth

 

forgot to state that this is for the PWR Radiator.

 

Good info, but what is this required for?

 

General info for any one needing to know.

Especially for efans or custom fan shrouds

 

i guess for the people doing e fan conversions, when they have a different shroud that they want to know if it will fit

 

Oh wow. Glad I found this thread!

I'll have to check these sizes against the junkyard fan+shroud I have.

 

Happy to know it came to good use.

 

this info is all in the FSM as well...for the stock radiator. not sure if its any different from the PWR in dimensions.

 

None of that information is in the FSM.


PWR is actually larger and chunkier.

Additionally the holes for the fan shround to rest on the OEM radiator are circular where PWR's are rectangular and are about 1/2 an inch off OEM specs.

 

Just measured the shroud I have (From a Nissan Quest LOL)
23 1/2 x 19 1/2

That should do decently.