Stuck in manual mode
#17
#19
Here is what I wrote from another thread (https://g35driver.com/forums/drivetr...ter-stuck.html)
Update:
I did take the center console apart and got the shifter working. You have to follow the instructions on page 237 of the AT section of the factory manual to get to the shifter. Once you remove ventilator duct 2, you can undo the 4 bolts holding the shifter down. Once I did that and lifted up slightly on the shift assembly, I could move the shifter around enough that it finally snapped back into place. Works perfect. I know I saw similar advice on another post here at driver, but can't seem to find it at the moment. Here is another link to someone with similar issues in case it comes up for someone else again:
http://forums.nicoclub.com/zerothread/285809
Update:
I did take the center console apart and got the shifter working. You have to follow the instructions on page 237 of the AT section of the factory manual to get to the shifter. Once you remove ventilator duct 2, you can undo the 4 bolts holding the shifter down. Once I did that and lifted up slightly on the shift assembly, I could move the shifter around enough that it finally snapped back into place. Works perfect. I know I saw similar advice on another post here at driver, but can't seem to find it at the moment. Here is another link to someone with similar issues in case it comes up for someone else again:
http://forums.nicoclub.com/zerothread/285809
Thread
Thread Starter
Forum
Replies
Last Post
master111
G35 Coupe V35 2003 - 07
2
09-25-2015 08:32 PM