Trunk arm lift broken....where to find a replacement :( - Pics inside
#1
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
Trunk arm lift broken....where to find a replacement :( - Pics inside
Hey folks.
So it was -31C outside today and I was closing my trunk as usual but it sounded somewhat off.
After a few tried the trunk arm on the left side just snapped in two.
I think its due to the ice build up under the arm and extremely low temperatures that caused it.
Pictures below:
Right side:
I've been quoted a high price for each side by the Canadian dealership - no surprise there.
(need the right side one also as that is completely missing)
So where can I buy a used or cheaper part.
Anyone replaced one of the before?
I take the labor isn't going to take too much though.
What are your thoughts.
Thanks.
So it was -31C outside today and I was closing my trunk as usual but it sounded somewhat off.
After a few tried the trunk arm on the left side just snapped in two.
I think its due to the ice build up under the arm and extremely low temperatures that caused it.
Pictures below:
Right side:
I've been quoted a high price for each side by the Canadian dealership - no surprise there.
(need the right side one also as that is completely missing)
So where can I buy a used or cheaper part.
Anyone replaced one of the before?
I take the labor isn't going to take too much though.
What are your thoughts.
Thanks.
Last edited by bigjee; 02-01-2011 at 02:12 PM.
#3
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
Thanks for the link.
While signing up with them I cant see the option for shipping to Canada?
what gives?
EDIT: had to call it in and got the parts shipped to my family in NY.
total for 2 sides is $266.20 plus $10 shipping to NY state.
Last edited by bigjee; 02-01-2011 at 04:14 PM.
#5
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
I checked Partsource, NAPA and Piston ring which are the main local autoparts stores here and none of them have it.
all of them recommended a wrecker or a dealership.
1 advised me to get parts from the US (like g35papa's link)
One person on the phone mentioned Monroe and Strong arm as the manufacturers for parts like this.
Anyone know anything about that.
Thanks for the suggestions thus far.
#7
Trending Topics
#8
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
Hi thanks for the offer but i need a pair.
Its so cold out here that putting stress on the single lift arm is going to snap it again so that is why i need a pair.
Wonder if anyone else has one. hmmmm
#10
#12
Joined: Sep 2010
Posts: 329
Likes: 14
From: Winnipeg, MB, Canada
Yes I PM'd Heist. Haven't received a reply back yet.
I placed an order with infiniti parts online but I can cancel it tomorrow by calling in first thing in the morning.
Will do I'll keep you posted.
Is there anyway you can confirm that you have a pair.
Thanks.
I'll pm in case I cant find one tomorrow.
Thanks for the help.
I placed an order with infiniti parts online but I can cancel it tomorrow by calling in first thing in the morning.
Is there anyway you can confirm that you have a pair.
Thanks.
Thanks for the help.