Jdm double din CAGE?
#1
Jdm double din CAGE?
Looking at this do I need the CAGE for install?
How hard is the dual climate mod?
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
TIA
How hard is the dual climate mod?
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
TIA
#2
^ The metal "cage" is needed, however you can just reuse the existing one that is attached to your factory radio. They usually do not come included in the JDM DD kit. So if you purchase that one you will have an extra.
The dual climate control mod is a bit tricky if you don't have much experience with a soldering gun. Also, when removing the dual climate control button you have to be very careful not to damage the tiny plastic clips, they break very easy. There is some really helpful DIY info in the Audio/Video/Electronics section if you plan on installing it yourself.
The dual climate control mod is a bit tricky if you don't have much experience with a soldering gun. Also, when removing the dual climate control button you have to be very careful not to damage the tiny plastic clips, they break very easy. There is some really helpful DIY info in the Audio/Video/Electronics section if you plan on installing it yourself.
#3
Looking at this do I need the CAGE for install?
How hard is the dual climate mod?
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
TIA
How hard is the dual climate mod?
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT
TIA
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
02-26-2018 06:14 PM
FS[NorWest]: 04 OEM Faceplate and CD/Tape Unit
Oregon13
Audio/Video/Electronics
5
03-01-2016 12:06 AM