G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Blue Bat roof overlay...need help!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 31, 2011 | 10:04 AM
  #1  
dylangood25's Avatar
Thread Starter
|
Registered User
Joined: Feb 2011
Posts: 64
Likes: 0
From: cleveland OHIO
Blue Bat roof overlay...need help!

hey everyone,
so after much wait i finally got my black roof overlay and im going to install it myself. if anyone on here has done this please throw some advice my way!

Should i clay bar the roof? whole car needs it but im not sure
Should i wax the roof before install? car needs wax
any other prep i should be aware of??
Can someone give me a brief step by step on install?
thanks anyone for help
-Dylan
 
Reply
Old Mar 31, 2011 | 01:21 PM
  #2  
dylangood25's Avatar
Thread Starter
|
Registered User
Joined: Feb 2011
Posts: 64
Likes: 0
From: cleveland OHIO
bump please help!!
 
Reply
Old Mar 31, 2011 | 05:33 PM
  #3  
srv2nv's Avatar
Registered User
15 Year Member
Liked
Loved
iTrader: (5)
Joined: Mar 2009
Posts: 1,726
Likes: 77
From: The 'shnall
G35 Sport
Here ya go...

http://auto.badtziscool.com/how-tos/...-roof-overlay/
 
Reply
Old Mar 31, 2011 | 07:17 PM
  #4  
mkvl127's Avatar
Registered User
Joined: Mar 2009
Posts: 272
Likes: 5
i dont have the bluebats overlays but this is what i did with mine..clay bared the roof..then washed only the roof with dishwasher soap which is a degreaser and will remove wax..then right before the install i wiped down the entire roof and crevices where the overlay will fold into with rubbing alcohol to make sure theres no wax or grease on the roof...the more hands the better..i did it with me and my friend..if we had a 3rd person it would of been better...i also installed it with the sunroof open and then cut it out and folded it into the sunroof so when im in the car and the roofs open u see black and not the color of the car..we made it pretty tight over the sunroof and placed a little weight on it and heated it slightly so it would sink into the car then made the cuts, this was done after all other cuts were made and the overlay was completely dry, use a blow dryer not a heat gun(heat gun puts out waayyy too much heat)..we layed the overlay on the hood and soaked it then picked it up and flipped it onto the roof and began working it..my overlay was one solid sheet//when i bought mine bluebat had a 2 peice roof overlay and i didnt want the seem other wise i would of bought his..hes got good quality stuff...doo little spirts of heat if needed with the sunroof..dont hold it there too long as u may destroy it..ull see when u get to that part
 
Reply
Old Mar 31, 2011 | 08:18 PM
  #5  
dylangood25's Avatar
Thread Starter
|
Registered User
Joined: Feb 2011
Posts: 64
Likes: 0
From: cleveland OHIO
thanks guys! great advice..will hopefully be applying this weekend
 
Reply
Old Mar 31, 2011 | 11:40 PM
  #6  
Caracicatriz's Avatar
Registered User
iTrader: (3)
Joined: Mar 2010
Posts: 112
Likes: 5
From: Philly
Good luck! I failed miserably doing my tails. Hopefully you are more patient than me.
 
Reply
Old Apr 1, 2011 | 11:33 AM
  #7  
mkvl127's Avatar
Registered User
Joined: Mar 2009
Posts: 272
Likes: 5
mine took 3 hours so plan on working atleast 4 since the friend that helped me is very experienced in roof overlays
 
Reply
Old Apr 4, 2011 | 07:28 PM
  #8  
Blue_Batmobile's Avatar
Official Sponsor of the Florida G35 Club
iTrader: (28)
Joined: Jun 2004
Posts: 4,654
Likes: 33
From: San Diego
Originally Posted by srv2nv


My Roof Overlays are ONE PIECE NOW .

B@t™
 
Reply
Old Apr 5, 2011 | 01:13 PM
  #9  
dylangood25's Avatar
Thread Starter
|
Registered User
Joined: Feb 2011
Posts: 64
Likes: 0
From: cleveland OHIO
failed miserably. buying a new one and trying again haha
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
davizzle
Picture Share
23
Feb 4, 2018 12:41 PM
g.spot
G35 Cars
12
May 9, 2016 10:54 PM
9tray turbo
Media Share G35 Coupe V35
4
Sep 29, 2015 10:22 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:09 PM.