Help me with exhaust!
Registered User
iTrader: (4)
Joined: Jul 2010
Posts: 765
Likes: 39
From: Western Colorado
OB '04 Coupe Premium w/Performance Wheel & Tire
If you want cheap, get the Megan system, if you want cheaper and better quality, get the HR Y, coupe mid and see which muffler you think sounds best. For the Y pipeand mid, check the classified on here and my350z.com; they are getting rare and expensive so start looking.
Also, plenty of shops can weld a 3" cat back system ranging from $300 to $450, imo nothing sounds and performs better than motordyne for our cars. The VQ exhaust is rare, there were only 8-10 made, and cost ~$800 for a mid and axle back, but worth every penny. Just ask Blue Dream, he's got Motordyne from the ART pipes to the Dual Axle back, I guess you could have a shop try and replicate it.
Also, plenty of shops can weld a 3" cat back system ranging from $300 to $450, imo nothing sounds and performs better than motordyne for our cars. The VQ exhaust is rare, there were only 8-10 made, and cost ~$800 for a mid and axle back, but worth every penny. Just ask Blue Dream, he's got Motordyne from the ART pipes to the Dual Axle back, I guess you could have a shop try and replicate it.
I'm running a megan hr y-pipe, custom mid pipe(removed resonator), and a magnaflow axleback. The exhaust note can't get any better! I'm in love with my exhaust sound, minimal droning and still has that g35/350z finesse.
Joined: Mar 2009
Posts: 18,299
Likes: 1,488
From: By the sea, Tx
G35 sedan w/ too much money in mods

If you want cheap, get the Megan system, if you want cheaper and better quality, get the HR Y, coupe mid and see which muffler you think sounds best. For the Y pipeand mid, check the classified on here and my350z.com; they are getting rare and expensive so start looking.
Also, plenty of shops can weld a 3" cat back system ranging from $300 to $450, imo nothing sounds and performs better than motordyne for our cars. The VQ exhaust is rare, there were only 8-10 made, and cost ~$800 for a mid and axle back, but worth every penny. Just ask Blue Dream, he's got Motordyne from the ART pipes to the Dual Axle back, I guess you could have a shop try and replicate it.
Also, plenty of shops can weld a 3" cat back system ranging from $300 to $450, imo nothing sounds and performs better than motordyne for our cars. The VQ exhaust is rare, there were only 8-10 made, and cost ~$800 for a mid and axle back, but worth every penny. Just ask Blue Dream, he's got Motordyne from the ART pipes to the Dual Axle back, I guess you could have a shop try and replicate it.
I just bought a tanabe medalion catback for $450 on amazon. I'll let you guys know how it sounds. Not to thread jack, but do I have to get the bracket for the 03-04 g35 or would it be possible to relocate the old one? I have an 06x.
jacked...
jacked...
As for completing it with the muffler, either HKS or Magnaflow will be fine. Check out this thread. The drone gets much better as the system settles.
https://g35driver.com/forums/media-s...axle-back.html
The system looks amazing! My wife thinks it looks cool too. I have the '07 HR Y-pipe ready for the install. Just need to order the '03-'04 muffler hanger parts for the install.
OP, you need to look into this system. $452 from Amazon shipped. Sound clip for the Tanabe is on page #47 of the Sedan Aftermarket Exhaust sticky here in the sedan section.
Thread
Thread Starter
Forum
Replies
Last Post





