G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

G35x catback

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 04-13-2012 | 08:25 AM
supG35x's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Dec 2011
Posts: 79
Likes: 1
From: Springfield, MA
G35x catback

I'm really having hard time looking for g35x catback exhaust... my mechanic said its cheaper to find an aftermarket catback instead of looking for a oem catback. Everyplace I went to, its either coupe or rwd models that catback was sold too ..... so all g35x families! Help me out!! Thanks
 
  #2  
Old 04-13-2012 | 09:09 AM
SkylinesTheLimit's Avatar
Registered User
iTrader: (1)
Joined: Mar 2011
Posts: 257
Likes: 25
From: Johns Creek, GA
Any Y-back system will fit. The Stillen Catback will fit too.

https://g35driver.com/forums/g35-sed...ful-links.html
 
  #3  
Old 04-13-2012 | 09:10 AM
pulsar1's Avatar
Registered User
iTrader: (1)
Joined: Dec 2008
Posts: 96
Likes: 13
From: Cincinnati, OH
The rwd catbacks are the same as the X..
 
  #4  
Old 04-13-2012 | 08:32 PM
Bastone's Avatar
Registered User
iTrader: (2)
Joined: Sep 2011
Posts: 272
Likes: 19
From: 905
Honestly, for the price that a full cat-back runs these days, you're better off doing something a lot easier.

1. Pick up a new or used OEM Coupe Midpipe
2. Pick up a new Magnaflow muffler suited to your taste
3. Drive to exhaust shop
4. Have them install it.

or if you're a crafty fellow, remove the old parts yourself and weld the new ones on.

Done.
 
  #5  
Old 04-13-2012 | 08:54 PM
X-Rated's Avatar
Registered User
iTrader: (2)
Joined: Mar 2012
Posts: 182
Likes: 6
From: 718 , NY
im thinking more along the lines of the Tanabe Medalion with a 350Zs middy with the extension, i have a '06 G35x , any suggestions? i know i dont need to replace the HR pipe cuz i already have the same as the Zs because of my transfer case. . . but any suggestions on if i need or should even bother replacing the middy, if its performance/needed , or just a sound preference. and what type of Tanabe medalion exhaust system do i need ?
Thanks for the help guys i been reading around and not too many specifics of what i wanna do to my X
 
  #6  
Old 04-13-2012 | 10:26 PM
SkylinesTheLimit's Avatar
Registered User
iTrader: (1)
Joined: Mar 2011
Posts: 257
Likes: 25
From: Johns Creek, GA
Tanabe Medallion is a y back, meaning it includes a midpipe and muffler. The 350z midpipe would most likely be for sound purposes, though I can't say for better or worse. You'll most likely get the same hp gains from each
 
The following users liked this post:
X-Rated (04-15-2012)
  #7  
Old 04-14-2012 | 02:37 AM
Cpoups's Avatar
Registered User
iTrader: (1)
Joined: Jul 2011
Posts: 87
Likes: 10
From: Calgary AB Canada
Ya I think the 350z mid pipe is for sound. I have a magnaflow with a custom pipe and flange that attaches to the stock mid pipe of my 05x. It is louder than stock but not too loud when driving. It sounds pretty mean when you get on it though.
 
The following users liked this post:
X-Rated (04-15-2012)
  #8  
Old 04-14-2012 | 11:00 AM
Andyl's Avatar
Registered User
iTrader: (2)
Joined: Feb 2004
Posts: 284
Likes: 0
From: Minnetrista Mn
not all systems fit the X I had gotten the Borla and it hit the transfercase so not all systems fit
 
  #9  
Old 04-15-2012 | 11:30 PM
X-Rated's Avatar
Registered User
iTrader: (2)
Joined: Mar 2012
Posts: 182
Likes: 6
From: 718 , NY
Thanks guys ! Then I'm just going to get the Tanabe medallion exhaust system and install it and take it from there see if later on I want to the Zs middy , appreciate the help everyone
 
  #10  
Old 04-15-2012 | 11:52 PM
01yellowr's Avatar
Registered User
iTrader: (7)
Joined: Jul 2011
Posts: 192
Likes: 8
From: NJ
I have a complete oe cat back sitting in a box at my buddy's shop right now if you want it. I just installed a stillen cat back so I don't need it anymore. Shoot me a pm if interested.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Claudiu
V36 Brakes, Suspension, Wheels & Tires
3
03-10-2018 12:38 PM
The Fixer
Steering & Suspension
15
11-01-2015 04:26 PM
AJC128
New Members Check In
1
11-01-2015 12:55 PM
Claudiu
G35 Sedan V36 2007- 08
0
09-26-2015 02:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:34 PM.