Welcome!!!!

 

The A/C maybe a simple fix, it could be the temp sensor hose (not sure on the correct name) came undone. It is in the driver side knee panel, directly below the ignition you can pull the panel down and check to see if the hose is connected. It goes behind a small rectangular plastic piece that you can easily see. If it is unplugged, just plug it in and it will work again, I know this because I did not plug it back in after I installed my radio

 

expensive day...

New tires, brake pads, alignment and had my rotors installed.

But took care of the **** tires on the car and the pulsing sensation under braking


now to look at the AC and seat issues.

really appreciate all the advice you guys have given.

 

You can push that dent out with your hand. Pull the liner down and push it out.

 

^i dont think its that easy with metal panels. if it was the bumper no problem

op for the headlights ive see inifinit offer some kind of tab replacement for the broken tabs. ive see it before if you look on their parts site and drill down. idk how it looks or works but it exists. theres a pic but its the diagram type pic and hard to make it out

 

Good job so far, keep up the good work. It seems like you've got a good grip on what's ahead.

 

Got these today. Obvious fakes (says CALSONIS on the back)....BUT works well, range is about 30 feet.

Replaced the cabin air filter...looked like it had never been changed before...

More progress

 

Thanks. While removing and replacing the headlights I did try and push on the dent...would not budge.

If the JB Weld doesn't hold I will look into that thank you

 

Remaining problems

AC issue
Passenger seat
Temp gauge light bulb
clock light bulbs
Drivers side fender dent

love the way this car rides though.