VDC + Brake + Slip lights ONLY when it's cold.

Subscribe
May 14, 2014 | 01:26 PM
  #1  
Checked the brake fluid and it's fine. What would cause these lights to come on? Hard to test now, but basically when I was in the mountains or it snows in Denver, the lights turn on. Occasionally the brake like doesn't come on and it's only the VDC + Slip. Anywho... any advice? Going to be hard to check this summer but figure if there's any simple answers to keep in mind that'd be great. Thanks!
Reply 0
May 14, 2014 | 03:37 PM
  #2  
Does it have anything to do with moisture, or freezing temps?

If you find the light comes on under freezing, i would suspect water has gotten somewhere where it shouldn't and when it freezes, causes issues.

My suspect would be the ABS sensors and wiring. That's where I would check.


Unsure if this would be of any use to you

http://www.nicoclub.com/FSM/G35/Seda..._Sedan/brc.pdf
Reply 0
May 14, 2014 | 03:52 PM
  #3  
You know, it very well could be a moisture issue. It might have done it when it was raining (cold rain, in the 30's and transitioning to snow).

I'll look through the factory manual and maybe take a quick visual peak at the ABS pump/sensors/wiring. Thanks for the direction on that!
Reply 0
Subscribe