Hi there, for some reason, when I use the automatic, 1 click, window feature on my driver window, when the window gets to the top, it comes back down about 6 inches. I have to hold the button for it to shut. I don't believe it is a fuse problem because if a fuse was blown, it probably wouldn't work at all. So what do you guys think the problem is?

 

Hope this will help http://www.nicoclub.com/infiniti-service-manuals

 

You have to reset the window limit. There is a button behind the door panel and a reset procedure on here somewhere. I just dont use the 1 click up on mine since mine does the same.

 

The reason is your window thinks it has hit an obstruction (like your fingers) and is reopening because of the anti-pinch "feature". To reset the system on later models (not sure when this started) do his:
Start with the window fully open.
Pull up and hold the close switch.
Continue to hold the switch up for 2 seconds after the window has closed.
And that should do it. You've now trained the motor to know where the window frame is.
Hope that works.