Radiator
#1
#3
My radiator blew in May and I replaced it with the Denso unit from Rockauto. It was almost a perfect fit. There are 2 plastic tabs on the bottom of the radiator that hold the ac condenser in place. The Denso's tabs stuck out about 1/4" more than the OEM radiator, so I had to use a dremel to remove a little bit of the lower rad. support to make it fit. I've put about 6000 miles on it and so far so good.
#4
My radiator blew in May and I replaced it with the Denso unit from Rockauto. It was almost a perfect fit. There are 2 plastic tabs on the bottom of the radiator that hold the ac condenser in place. The Denso's tabs stuck out about 1/4" more than the OEM radiator, so I had to use a dremel to remove a little bit of the lower rad. support to make it fit. I've put about 6000 miles on it and so far so good.
#5
If you haven't installed a new radiator yet, I'd suggest going with a Mishimoto all aluminum radiator. Worked great for me with a perfect fit when I used to have a G35.
Thread
Thread Starter
Forum
Replies
Last Post
gDirty5's
G35 Cars
1
10-26-2015 08:49 AM