What did you do to the G Sedan today?
#16
#18
#19
#21
The finish on the wheels looks nice. What paint/equipment did you use? I tried to refinish my stock 17s for my winter setup as they were hammered from the previous owner. Fixed all the gouges and rash but the paint finish didn't come out great so I'm going to try again. Thinking about trying gunmetal since the hypersilver didn't turn out great.
IllaNoize, I don't have any decent pics of my car. It's a very stock-looking daily driven OB sedan. It has a completely rock blasted front bumper and is usually dirty.
IllaNoize, I don't have any decent pics of my car. It's a very stock-looking daily driven OB sedan. It has a completely rock blasted front bumper and is usually dirty.
#22
The finish on the wheels looks nice. What paint/equipment did you use? I tried to refinish my stock 17s for my winter setup as they were hammered from the previous owner. Fixed all the gouges and rash but the paint finish didn't come out great so I'm going to try again. Thinking about trying gunmetal since the hypersilver didn't turn out great.
IllaNoize, I don't have any decent pics of my car. It's a very stock-looking daily driven OB sedan. It has a completely rock blasted front bumper and is usually dirty.
IllaNoize, I don't have any decent pics of my car. It's a very stock-looking daily driven OB sedan. It has a completely rock blasted front bumper and is usually dirty.
It is all in the prep(as everybody says) but also in the finishing work too. here was my process
Step 1) wash wheels/repair rash
step 2) Wash Wheels again
Step 3) Wetsand with 400
Step 4) Wash Wheels
Step 5) use Wax and Grease Remover
Step 6) Apply primer to bare metal areas (3 coats)
Step 7) dry sand all the primered spots(turned out to be the whole wheel) with 2000
Step 8) Wash wheels
Step 9) Wax and Grease Remover
Step 10) 3 coats of Colour (2 cans)
Step 11) 3 coats of clear (2 cans)
Because of the way the wheels are designed there was overspray in areas on the wheel surface itself so it was very grainy in some areas like the inner lip.
Step 12) Wait 7 days for the paint and clear coat to fully cure
Step 13) Wetsand 2000 Grit
Step 14) WASH WHEELS!!!!
Step 15) use my new Mothers power cone and liberal amounts of compound(remember to "prime" the power cone...go watch ammonyc's youtube channel about priming the pad) and polished.
Step 16)...did I forget to mention wash the wheels!?
Step 17) get yelled at by the wife for coming to bed at 4am every weekend night for the last two weeks
It's just spray paint so it's not perfect but i love it. I'm glad I waited for the paint to cure before I polished the wheels cause the power cone caught on the wheel weird a few times and the drill struck the spokes a few times and there was no paint damage. had I done that right after it was dry or after a day or two before it fully cured and hardened there's no doubt I would've had to redo it.
#23
#25
#26
#29
#30
![Name: IMG_20160326_231750.jpg
Views: 1026
Size: 285.3 KB](https://g35driver.com/forums/attachments/g35-sedan-v35-2003-06/181056d1501228119-what-did-you-do-g-sedan-today-img_20160326_231750.jpg)
![Name: 20160326_201052.jpg
Views: 995
Size: 139.9 KB](https://g35driver.com/forums/attachments/g35-sedan-v35-2003-06/181057d1501228119-what-did-you-do-g-sedan-today-20160326_201052.jpg)
Been wiring these up and they have been a pain lol. Quad demon rgb eyes and 70mm starry night halos. I'm sure I may the first to put these on a first gen g35 but it's not that important. Just happy to have something I haven't seen on a g35 before. I got to the g35 party kinda late lol
Last edited by eazdaskeez; 03-26-2016 at 11:35 PM.