oem climate control conversion
Registered User
iTrader: (1)
Joined: Apr 2018
Posts: 577
Likes: 107
From: Springfield, Mo
1990 Mustang GT - 351W Lightning bored/stroked 383CI TFS heads 78mm Turbonetics huricane
Nope 
Just kidding. I was going to make a write up "How to" but it got a little too in depth with over 4 revisions of boards and exactly where the boards had to be severed. It also required building a separate power supply on top of things. I really didn't have time to describe in detail where anybody could perform this on all revisions and stopped after building 4 of them. Honestly it's easier buying a used aftermarket setup than spending 8 hours cutting and wiring something like this up. In the beginning I really thought it would be easier. I really should have just started from scratch and built an Arduino based AC control board, it would have been easier.
Link to original stuff:
https://g35driver.com/forums/audio-v...l-control.html
Just kidding. I was going to make a write up "How to" but it got a little too in depth with over 4 revisions of boards and exactly where the boards had to be severed. It also required building a separate power supply on top of things. I really didn't have time to describe in detail where anybody could perform this on all revisions and stopped after building 4 of them. Honestly it's easier buying a used aftermarket setup than spending 8 hours cutting and wiring something like this up. In the beginning I really thought it would be easier. I really should have just started from scratch and built an Arduino based AC control board, it would have been easier.
Link to original stuff:
https://g35driver.com/forums/audio-v...l-control.html
Last edited by scumbagsleeper; Dec 31, 2019 at 12:54 AM.
Thread Starter
|
Registered User
Joined: Nov 2019
Posts: 11
Likes: 2
G35x
Nope
Just kidding. I was going to make a write up "How to" but it got a little too in depth with over 4 revisions of boards and exactly where the boards had to be severed. It also required building a separate power supply on top of things. I really didn't have time to describe in detail where anybody could perform this on all revisions and stopped after building 4 of them. Honestly it's easier buying a used aftermarket setup than spending 8 hours cutting and wiring something like this up. In the beginning I really thought it would be easier. I really should have just started from scratch and built an Arduino based AC control board, it would have been easier.
Link to original stuff:
https://g35driver.com/forums/audio-v...l-control.html
Just kidding. I was going to make a write up "How to" but it got a little too in depth with over 4 revisions of boards and exactly where the boards had to be severed. It also required building a separate power supply on top of things. I really didn't have time to describe in detail where anybody could perform this on all revisions and stopped after building 4 of them. Honestly it's easier buying a used aftermarket setup than spending 8 hours cutting and wiring something like this up. In the beginning I really thought it would be easier. I really should have just started from scratch and built an Arduino based AC control board, it would have been easier.
Link to original stuff:
https://g35driver.com/forums/audio-v...l-control.html
Thread
Thread Starter
Forum
Replies
Last Post
