aem
Joined: Mar 2005
Posts: 496
Likes: 1
From: Sherman Oaks C.A
aem
hooked up my car last night wit an AEM col air system . now i havent heard any one talk about the aem intake for our cars . dont know ,let know what you guy t hinck about it
Originally Posted by soad
Last night I installed the AEM Cold Air Intake. I don't recall seeing much discussion around this intake before on this particular forum. Does anyone have an opinion or experience they'd like to share?
Other than that I love it. No A/C line clearance issues or any of the other negative experiences some others have had with other intakes (engine cutting out when idling at speed etc)
I also managed to pick mine up for $100 too so you can't complain about that
I've heard the same thing... About the "stubby" intakes that don't take air from the front air ducts but instead take air from inside the engine bay. The AEM CAI is not one of the stubbies. Nor is the Injen RD1992.
The JWT pop charger is a noise mod. It is NOT a cold air intake. Rather, it's an unrestricted WARM air intake. I imagine you'd see losses with it in the real world. The stillen high flow airbox is no more of a cold air intake than stock, but it's a less-restrictive intake. I imagine you would see INCREASES with it in the real world.
- The stock intake, by the way, is not bad at all. It probably catches WAY more cold air than the pop charger or one of those cheap $100 intakes you see on ebay. The z-tube is a good addition for increasing efficiency of the horrible stock intake tube, but if I were going the z-tube route, I'd do it either in combination with the stillen air box, or with the stock airbox.
NOT a CAI:
NOT a CAI:

Stillen: A good choice.

...Can't find pictures of AEM or Injen installed but the difference is they take cold air from the outside, not warm air from inside the engine bay.
The JWT pop charger is a noise mod. It is NOT a cold air intake. Rather, it's an unrestricted WARM air intake. I imagine you'd see losses with it in the real world. The stillen high flow airbox is no more of a cold air intake than stock, but it's a less-restrictive intake. I imagine you would see INCREASES with it in the real world.
- The stock intake, by the way, is not bad at all. It probably catches WAY more cold air than the pop charger or one of those cheap $100 intakes you see on ebay. The z-tube is a good addition for increasing efficiency of the horrible stock intake tube, but if I were going the z-tube route, I'd do it either in combination with the stillen air box, or with the stock airbox.
NOT a CAI:
NOT a CAI:

Stillen: A good choice.

...Can't find pictures of AEM or Injen installed but the difference is they take cold air from the outside, not warm air from inside the engine bay.
Thread
Thread Starter
Forum
Replies
Last Post



