G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

6MT Newbie Question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Sep 13, 2005 | 10:55 PM
  #1  
dchu1975's Avatar
Thread Starter
|
Registered User
Joined: Jul 2005
Posts: 29
Likes: 0
6MT Newbie Question

Okay, I know a lot of you are going to think I'm a complete idiot, but I wanted to ask anyway. About a month ago, I purchased a 6MT sedan. It was my first manual so it took a little time to learn. The shifting is fine now for everyday driving. But I suck when it comes to shifting fast like when that TL edges forward at a red light. My problem is from 1st to 2nd, I always seem to lunge forward. Or the engine revs. I find that depressing the clutch just to the disengage point rather than depressing it all the way down helps significantly. Is that bad for the clutch? Can I do that for normal driving too? Thanks.
 
Reply
Old Sep 13, 2005 | 11:37 PM
  #2  
jawjaw's Avatar
Registered User
iTrader: (1)
Joined: Feb 2005
Posts: 1,656
Likes: 0
From: Houston
For some reason, Infiniti sets up the clutch pedal with tons of free play so that's normal. I had the same problem with I got my 6mt not too long ago and it's a common complaint. The good news is that the clutch pedal is adjustable. I suggest starting here to learn how:

http://www.350zmotoring.com/forums/s...ghlight=clutch

It's pretty easy to do but getting the fork off the clutch pedal can be a challenge. I found that if you back off the top sensor it will give you some extra room when you pull up on the clutch pedal. I adjusted my pedal two different times until I got it perfect. It engages quicker from the floor and is smoother.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th611
G35 Cars
7
Oct 27, 2015 03:48 PM
RA081024
New Members Check In
1
Aug 18, 2015 07:03 AM
G35Sask
Intake & Exhaust
16
Aug 5, 2015 10:17 PM
nervseele
Interior & Exterior
4
Jul 17, 2015 11:21 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 10:02 AM.