Do I need to unhook the battery before installing?

 

I didn't but I had the engine and lights all turned off.

 

The clear corner install is simple. Just turn the engine off. Turn the lights off. Then you pop out the corners. No need to worry about the batteries.

After you do the install, you'll be going: WTF was Nissan thinking?!



Trust me.

 

Naaaa, you should be fine as long as lights are off.
Nice mod. enjoy.
C.

 

werd. so easy to steal.

 

No you don't, just engine / lights off. Then you just pull on the amber corners & they pop off easily. Just turn the bulb or leave the stock bulb on the new clear corners (and take the amber bulbs off the clears) if you want clear lights as they look better with the clear corners. I dont really like the amber lights that come with the clears... I've drove past over 20 police cars, clear lights on clear corners & none pulled me over.

 

Sweet, that was easy. I just kept the clear bulbs and can't imagine a cop would notice. I tried to unplug the harness see how the amber bulbs looked but couldn't get it to pop off. Is there a clamp or do I just need to tug harder. Oh yeah, looks really nice : )

 

Has anyone come up with a simple bolt-down locking mechanism for these? I just ordered mine and would hate for them to "disappear" on me.

 

You can take the bulbs directly out of the socket, however it is also rather easy to remove the bulb socket from the wire harness by pushing a little clasp down with your finger nail (where the wire goes into the back of the socket).

I've removed my clear corners on 2 occasions, 1 to install them, 2 to install LED buls. Today I noticed one of the markers was sticking out a little bit, I pushed it back in, so apparently it gets loose with very little use, try not taking the markers in and out.