Would Foose Speedsters 20x9.5 or 20x8.5 fit on a 05 sedan. I want something with a nice lip. Thanx for the help.

 

A taller wheel won't give you a bigger lip. Its based on the offset of the rim. I think (but I will leave to the more experienced folks on this site to verify and correct me) that the widest you can go in the front is an 8.5" with a +40mm offset.

The rear will fit up to a 10" with a +44mm offset?

 

I used to want the foose speedsters, they would be super nice in black, and yes they would fit the sedan, just get the right offset.
-GP-

 

Depends on the offsets.

 

That offset will work with the 10" wheel in the back and up front nothing over 8.5"

 

Which offset??? The 10" wide wheel with a +44mm offset will NOT work. It will stick way out from the fender. Shoe horning a 10" wide wheel in the rear will require a much bigger offset, like +55mm. perry, check your facts before you dole out bad advice.

 

^^WHS^^
10" will require no less than +55

 

I don't get Offset. Can some explain it 2 me?

 

this pic pretty well covers it.
Also go to tire rack in the tech section there is a write up.

 

Couple of more...

 

Pretty good description here.

http://www.discounttire.com/dtcs/infoWheelOffsets.dos

 

Well what dose it mean when you guy say +44 or +55. Is there a -44?

 

I should go with the 8.5 with what offset?

 

offset measurement in mm
effects the position of the wheel inside the wheel well of the car

 

I hav 8.5" with +42