Throttle Valve Closed Position Learning
Throttle Valve Closed Position Learning
Any one have "How to"? I believe I saw post about resetting pedal, ecu and throttle valve positions, but it wasn't "stickied" amd I can't find it.
Thank you
Thank you
I found the answer:
Perform If Throttle Actuator Is Disconnected
DESCRIPTION
"Throttle Valve Closed Position Learning" is an operation to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected.
OPERATION PROCEDURE
Make sure that accelerator pedal is fully released.
Turn ignition switch "ON".
Turn ignition switch "OFF" wait at least 10 seconds . Make sure that throttle valve moves during above 10 seconds by confirming the operating sound
Perform If Throttle Actuator Is Disconnected
DESCRIPTION
"Throttle Valve Closed Position Learning" is an operation to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected.
OPERATION PROCEDURE
Make sure that accelerator pedal is fully released.
Turn ignition switch "ON".
Turn ignition switch "OFF" wait at least 10 seconds . Make sure that throttle valve moves during above 10 seconds by confirming the operating sound
Joined: Jun 2002
Posts: 30,341
Likes: 9
From: Cambridge, Ont. Canada
Originally Posted by obender66
Any one have "How to"? I believe I saw post about resetting pedal, ecu and throttle valve positions, but it wasn't "stickied" amd I can't find it.
Thank you
Thank you
ECU RESETS.
Colin.
Thread
Thread Starter
Forum
Replies
Last Post
Silver tiburon
G35 Coupe V35 2003 - 07
12
Sep 4, 2015 07:17 PM
