Lowering My 05 G35x
Lowering My 05 G35x
ok, been doing some research really havent found the answer i'm looking for. ok already got the rims i want. going with the VR GT-V 19X8.5. Now i'm not looking for no big drop. am i better off just getting the tein type-h springs or should i get the 350z revised springs i've been reading about. also really havent found anything but are there full coilover setups for 35X?
There are no springs, coilovers, or shock/struts made for the X. I am in the same bought. I am trying to find the most close to correct way to lower my X. You can use any spring for the X but some people have had problems. I know that some X's have been lowered on the tein S-tech, h-tech and the eibach springs as well as the OEM 350z suspension.
Tonight on Sports Car Revolution, they will be discussing the G again-
http://www.sportscarrevolution.com/images/g35/index.htm
They installed the springs last week, though they didn't have the right shocks. We'll see what they turn up-
http://www.sportscarrevolution.com/images/g35/index.htm
They installed the springs last week, though they didn't have the right shocks. We'll see what they turn up-
Originally Posted by KrazyEd
There are no springs, coilovers, or shock/struts made for the X. I am in the same bought. I am trying to find the most close to correct way to lower my X. You can use any spring for the X but some people have had problems. I know that some X's have been lowered on the tein S-tech, h-tech and the eibach springs as well as the OEM 350z suspension.
I'm no suspension expert. From what I've read on this site, the Z springs do not drop the G as low as the others. I think most problems are linked to the oem shocks not being able to perform correctly, so the Z springs are just "less bad". Some one needs to make shocks and springs. They would have a corner on the market. I guess a lot of AWD cars are not moded??? From other posts stock sedan vs stock awd sedan shows the awd performing better at the track. Seems auto-x'ers would be interested in the G35x.
The only mod I really want to do is sway bars and drop it one inch. I can't do either. Crap. I even like my 17 inch rims. I just want to corner w/ much less body roll.
Disclaimer: Again, I'm not a guru in regards to susp mods....so if I'm wrong, please accept my apologies.
Trending Topics
Originally Posted by KrazyEd
There are no springs, coilovers, or shock/struts made for the X. I am in the same bought. I am trying to find the most close to correct way to lower my X. You can use any spring for the X but some people have had problems. I know that some X's have been lowered on the tein S-tech, h-tech and the eibach springs as well as the OEM 350z suspension.
There are springs available for the X.
http://www.stillen.com/product_detail.aspx?sku=HR53043
J
Originally Posted by AKG35X
no...there just mis-labeled...there are no springs specifically made for the X
Originally Posted by shredX
Anybody see Sportscar Revolution last night?
What did they come up with???
*sits on edge of his seat*
What did they come up with???
*sits on edge of his seat*
Honestly, I don't think that they ever installed shocks on the X.
Do you know where I can find a detailed suspension diagram?
I decided to go with tein h tech springs. now these should be able to fit on my o5X right? i'm not looking for a to big of a drop i just wanna kill the gap a little but still keep the stock ride. hope fully withing the year someone finally decides to make some full coilovers or some dam shocks.
Thread
Thread Starter
Forum
Replies
Last Post
kevintandmd
G35 Sedan V35 2003-06
2
Sep 3, 2015 06:41 PM




