On my 07G35S 6mt, Ive noticed that occationally, Ive caught the drive by wire throttle naping. It feels like when you step into an AT car and it has to kick down a gear to get going or a stumble like a cold carb engine. Anyone had the same experience?

Thanks

Jpr

 

I think it's typical of a D-B-W system to have such occasional hiccoughs, espcecially since the car is brand new, and all the computers are in the 'leaning mode'.

Look here in this thread for a very brief rundown on some of the learning parameters and procedures involved:

https://g35driver.com/forums/faq-diy/6538-ecu-resets.html

If the condition worsens, a CEL will be generated at which time a trip to the dealer is necessary to first find where the issue is and then fix it.
(unless you have a scanner of your own)..

Welcome, JPR, and please follow up with some feedback on the issue.

C.

 

Sometimes when it needs to downshift into 2, it'll go into 3 for 2 seconds THEN go to 2...This has happened 2 times so far and I don't like it...

 

I have had a MT6 for about a week so I'm obviously in "break-in mode", but I haven't noticed any "throttle lag" yet.

I have ran 2nd, 3rd and 4th from around 1k to around 4K numerous times trying to build as much cylinder pressure for break-in as I can.

Please continue to post your observations to see if anyone is experincing similar issues.

Welcome!