Has anyone encountered this? I disconnected the negative battery terminal to install some bulbs and now the window's auto-up feature doesnt work. Auto-down works, and up works but not Auto-up. Does anyone know how this can be fixed? Thanks

 

You just have to reset the anti-pinch thing. Roll the window all the way down and hold the switch down for 5 seconds then roll the window up and hold the switch for 5 seconds.

 

My master tech tells me you need to reprogram the switch, simply push button, making window go all the way up, hold there for ten seconds, try down same, should be redone! Any ?, call us or e-mail!,thx!
Derek(866)789-0207
www.grubbsperformance.com

 

who to believe, venerated Super Mod ChristianN or derek's mysterious Master Tech?

 

Split the difference and hold the button for 7.5 seconds down/7.5 seconds up - no more, no lesss!

 

Maybe I'm wrong, but that's what I did and it worked.

 

Thanks guys, I'll give it a try and will post results

 

worked for me thanks guys

 

IIRC, the manual states 3 seconds........but who's counting?

 

Hey guys. I ran into this same issue with both of my driver's side windows. Auto down works but auto up doesn't. I did the reset for the rear window and it worked out fine. With the front, after I tried the reset, the window wouldn't work at all. I'd have to wait for about a minute before it'd work again, but the same problem persists; auto down works but auto up doesn't. I must have tried doing this reset about 10 times with no luck.

Anyone come across this issue?

 

That's a strange one. Good luck.